Guidelines

What does E03 mean on Canon printer?

by Rhyley Bryan

What does E03 mean on Canon printer?

paper jam
If the orange light is lit and the E03 support code displays on your printer, there is a paper jam.

How do I fix Error 03 on my Canon printer?

CANON PIXMA MP280 ERROR E03 It can also happen if the output tray is not closed correctly. For rectifying the paper jam problem, remove the paper out of the Paper Output Slot or Rear Tray. If a piece of paper is left inside the Canon printer, switch it Off and then raise the scanning unit cover.

How do I fix E03 error?

How to Diagnose and Fix a Hoover E03 Error Code

  1. Remove the drain filter and rinse it to clean it.
  2. Check the drain pump and remove any blockages.
  3. Check that the drain hose is clear of obstructions.
  4. Check the wiring to the drain pump.
  5. Check there is no blockage in the drain pipe.

Why is the orange light flashing on my Canon printer?

Meaning: the printer is out of paper / No paper. Solution: Reload paper in the rear tray and press the Resume / Cancel button. Meaning: the paper exit tray is closed / Paper jam. Remove the jammed paper, replace the paper correctly in the printer, and then press the Resume / Cancel button.

How do I clear a Canon printer error?

Reset the Canon printer

  1. Switch on the printer.
  2. Press and hold the Stop/reset button.
  3. Press the button that you use to make a color copy and hold it down.
  4. Wait 5 seconds.
  5. The printer now reboots and sets itself up.
  6. Does the printer indicate that the device needs to be calibrated?
  7. You’ve reset your printer.

Where is the reset button on a Canon printer?

The reset procedure of the Canon printer is very simple. Find the Stop button on the control panel of the printer. Press the Stop button and hold it for a few seconds. Do not release it until the Orange color Alarm lamp blinks 21 times.

What causes E03 error?

The machine is unable to drain the water away Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.

How do I troubleshoot my Canon MP287 printer?

Entering Service Mode

  1. Turn the printer off (ON/OFF)
  2. Press and hold the STOP/RESET.
  3. Press the Power ON/OFF.
  4. Remove the STOP/RESET (Note: power ON/OFF is still on hold.
  5. Press the STOP/RESET 6x and release the STOP/RESET and Power ON/OFF.
  6. The entered the Service Mode, all LED will stop blinking.

How do I reset my Canon printer?

HOW DO I RESET MY CANON PIXMA PRINTER TO FACTORY SETTINGS?

  1. Check if the Pixma printer is turned on.
  2. Go to the Menu option and select Setup.
  3. Make use of the navigation arrows to highlight the option you want.
  4. Next, tap the Device Settings option and press the OK button.
  5. Choose Reset Settings.

Where is the reset button on a Canon Pixma printer?

How do I fix my Canon Pixma printer?

Try cleaning the printhead of your printer from your personal computer to solve the Canon Pixma troubleshooting issue. On your system, open the My Computer window. Select Control Panel and then click the Devices and Printers option. Right-click on the model of your Canon PIXMA device and choose the Properties button.


https://www.youtube.com/watch?v=pm6ZdWXvsEQ