Guidelines

What causes a Maytag washer not to agitate?

What causes a Maytag washer not to agitate?

If your Maytag washer won’t agitate but still spins, a likely cause is a broken agitator. However, a faulty transmission, damaged washplate (if there is no agitator), or a worn-out drive block could be to blame.

What causes a washer not to agitate or spin?

The washer transmission might be worn out or defective. Transmissions have gears in them that can fail causing the washer to not spin or agitate. If the motor is turning the transmission, but the washer won’t spin or agitate, consider replacing the transmission.

Why does my Whirlpool washer not agitate?

When your Whirlpool washer won’t agitate, spin, or drain, the culprit could be a defective drive block. The drive block connects the agitator to the washer transmission. If the drive block is worn out, the agitator may move a little or not at all, even when the transmission shaft is still moving.

How do I reset my Maytag Bravos washer?

Open the lid and redistribute your wash to balance the weight of the wet items, then restart the machine. Press “Start/Pause.” I have a maytag bravos xl, every … Unplug the washer for 1 minute from the electrical outlet. If the door lock switch does not engage fully, the washer will not move into the high spin mode.

Can you reset a Maytag washing machine?

If an error message causes your Maytag washer to not run properly, reset the washer to clear the error message. You also can reset the washer if you want to cancel a setting you chose.

How much does it cost to replace a washing machine agitator?

On average, expect to spend $350 to $575 for washing machine agitator replacement.

What does it mean when a washer won’t agitate?

If your washer won’t agitate but spins, a broken agitator may be to blame. The output shaft of the transmission is splined to the agitator to secure it in place. Over time, some of the components of the agitator can wear down or break with normal usage, causing your washing machine not agitating issue.

What causes a Whirlpool washer not to agitate?

How long should a washer agitate?

Front loaders: 70-120 minutes. High efficiency top loaders: 60-85 minutes. Agitator top loaders: 35-80 minutes.