What are the 3 basic components of an overhead crane?

The principal parts of overhead traveling cranes are: bridge girders, end trucks, trolley with hoisting mechanism, an operator’s cab or pendant control. Careful repair and maintenance are essential to safe crane operations.

Why are overhead cranes yellow?

hahahaha. Heavy equipment like Cranes and Extruders among other equipment are painted bright yellow as it is more visible than any other colour even in low visibility, which could be as a result of flying dust or fog or during dusk and dawn. Even during fog yellow light are used in vehicles as it is able to be seen.

How often is overhead crane training required?

every three years
When it comes to refresher training, the standards in some instances (like forklifts) are very specific: operators must be re-evaluated every three years to see if they are still competent to operate the equipment. Best practices say to apply this same rule to all types of equipment.

How do you inspect an overhead crane?

Inspection Items for Overhead Cranes in Regular Service

1. Check that the crane or hoist is not tagged with an out-of-service sign.
2. Check that all motions agree with control device markings.
3. Check that all braking motions do not have excessive drift and that stopping distance is normal.

What is the function of overhead crane?

To move extremely heavy or bulky loads through the overhead space in a facility, instead of through aisles or on the floor, an overhead crane (also called an industrial crane, crane, or overhead traveling crane is a machine that lifts, lowers and moves a load horizontally.

Is side pulling allowed in safe crane operations?

Regulatory & Consensus Standard Prohibitions on Side Pulls Crane and hoist side pulls are a known industry hazard and are prohibited by a multitude of regulatory and consensus stan- dards.

Where is the birdcage on a crane?

A birdcage is a short section of rope in which the outer strands are much longer than the rope and therefore “stand up”.

How long is overhead crane certification good for?

two years
Once obtained, this certificate will be valid for a period of two years. You will also be required to pass a drug test. Contact us here for a free conversation if you have still questions about Overhead Crane Training Requirements.

How long does an overhead crane Licence last?

This particular ID is open for up to five years. Optional as per the clients requirements, the ID can also double as the ATO for the host company and can be limited to that company if required.

What must be clearly displayed on any overhead crane?

The rated load of the crane shall be plainly marked on each side of the crane, and if the crane has more than one hoisting unit, each hoist shall have its rated load marked on it or its load block and this marking shall be clearly legible from the ground or floor.

Are hard hats required for overhead crane use?

All crane operators, riggers and employees who work in the area where overhead cranes are in operation must wear the appropriate PPE, such as hard hats, safety glasses, work gloves and hard-toe boots.

https://www.youtube.com/watch?v=nTI5C5jxWDA