How much HP can you get from a K20?

For the K20A series, the highest horsepower rating was 215hp at 8,000RPM with a peak torque of 149lb/ft at 7,000rpm. With some models producing 155hp (K20A6), others were capable a far more impressive 306hp at 6,500rpm in its stock turbocharged form (K20C1.)

Can you boost a stock K20?

you can boost a hell of a lot on a stock k20. dont worry about building it up, just buy the kit.

How much power can you push on a stock K24?

The max flow on a K24 is rated around 37lbs/minute. You can expect about 370 hp at the crank (give or take) when the K24 is pushed to the limit. Of course you can try to push past this limit, but you will hit the point where you run into diminishing returns.

Which K24 is best for boost?

The best combination for good power and good torque would be the k20/k24 head and block combination.

How long do K20 engines last?

K20 Overall Reliability It shouldn’t have any major issues on the road to 200,000+ miles. Some K20 owners won’t experience any of the issues we referenced in this post. At the same time – it’s rare for an engine to eclipse 200,000 miles without at least a few issues along the road.

How much HP can a K24 make?

The stock power output for the engine can reach 205 HP. With the addition of a turbocharger that power increases to 400HP+. Other performance parts can increase the engine’s power potential to the upper 200s and even 300 HP.

How much boost can a stock k20z3 handle?

They’re crap. But stock internals should hold 14-16lbs of boost. RSX-S’s have been known to hold 400hp on a stock bottom end.

Is K20 a VTEC?

In any internal combustion engine, the cylinder head is the key to unlocking power. In the case of the K20, the A2 variants use VTC and VTEC in one system (i-VTEC) which results in great power, while the A3 variants use VTC and VTEC-E which is labeled as i-VTEC but really shouldnt be.