How much does it cost to replace rotors on a Chevy Silverado?

How much are rotors for a 2011 Chevy Silverado?

Brake Rotors for 2011 Chevrolet Silverado 1500 – from $79.99+ | AutoZone.com.

How much does it cost to get new rotors and brake pads installed?

Labor at a shop to replace rotors and pads is approximately $150 to $200 per axle. Brake rotor and pad repair generally comes out to around $250 to $500 per axle when visiting a professional shop.

What kind of brake pads do Chevy Silverado use?

Low metallic NAO brake pads & rotors are made up of organic formula mixture with a very minimal amount of copper or steel. They provide better braking as compared to other brake pads. The ceramic brake pad and rotor is made up of soft material. This type of brake pad is very helpful for long service life.

What do I need to change my front brake pads?

To compress the front caliper piston, you will need a brake caliper compression tool, old brake pad, 10mm socket wrench, brake bleed kit, and drain pan. After compressing the front caliper piston, in this step, all you have to do is to remove old pads and hardware from the vehicle.

What do you need to replace a brake rotor?

You’ll need new brake rotors and pads from 1AAuto.com, jack and jack stands, 18mm to 22mm sockets and ratchet, breaker bar or pipe for some extra leverage since a couple of those bolts are pretty tight, and a T30 Torx bit and driver. If you have some rust you may need a couple of M10 bolts to help you get the disc or the rotor off.

What do I need to remove front brake caliper?

For the front brake caliper removal, you will need a flat head screwdriver or angled pry bar and 14mm socket wrench. To compress the front caliper piston, you will need a brake caliper compression tool, old brake pad, 10mm socket wrench, brake bleed kit, and drain pan.