How long do Zebra printheads last?

The normal life of the printer head is about 30km~50km, so how many Labels can be printed, the consumables are directly in contact with the printer head, so the quality requirements of consumables must not be evaluated by price alone. .

When should I replace my zebra printhead?

A printhead should be expected to print up to ten million labels before needing to be replaced. However, without the proper maintenance and care, this can reduce to as little as one million.

How long should a printhead last?

Generally printheads should serve you 1.5 – 2 years before giving any problems like print quality issues. You shouldn’t need to replace them until you see a message on the printer instructing you to do so.

How do you maintain a Zebra printer?

10 Maintenance Tips for Your Zebra Printer

1. Zebra Printer Maintenance Tips.
2. Keep Printheads Clean.
3. Check the Recommended Heat and Darkness Settings.
4. Keep the Media Sensor Clean.
5. Use Quality Ribbons.
6. Use a Wider Ribbon.
7. Use Good Quality Label Paper.
8. Use the Pause Test.

How do you troubleshoot a Zebra label printer?

To do this: turn the printer off, hold in the pause button, and turn the printer back on. Keep the pause button pressed until all the lights flash once. This will load 9999 test print labels into the printer. Release pause and you are ready for troubleshooting.

Is thermal printing cheaper than ink?

Thermal ink is typically more expensive than inkjet cartridges. Thermal printing is significantly faster than inkjet printing, making it better suited to high-volume printing runs.

What are the print numbers on a Zebra printer?

Zebra printers and printheads are designed, tested, manufactured and certified as a complete system to ensure optimal print quality and printhead life. Separate printhead part numbers available for each printer model based on print width.

Do you need to replace a Zebra printer printhead?

Zebra printhead replacement products deliver quality, reliability and performance for printheads that have become worn down or damaged. Every Zebra printhead is easy to install, and made to exacting engineering standards for consistent performance from your printer. 203, 300, and 600 DPI Printheads for Zebra’s Printers

What are the part numbers for HC100 printer?

Separate printhead part numbers available for each printer model based on print width. Please refer to the following URL for part numbers: Maintain top performance of your HC100 Patient I.D. Solution with a 300-dpi replacement printhead that is easy to install.