How do you program a key fob for a 2004 Chevy Malibu?

Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds , the doors will lock and unlock to confirm the programming of that transmitter. Repeat the previous step to program up to four transmitters.

Does a 2004 Chevy Malibu have a chip in the key?

One Transponder chip key for 2004 Chevrolet Malibu – brand new, aftermarket (NO GM logo). This key must be professionally cut when received by a local automotive locksmith (click here for Locksmith Search ) or hardware store.

How do you program a Chevy Malibu key fob?

How to Program Chevrolet Malibu Remotes

1. Enter your Malibu and close all the doors.
2. Insert your key into the ignition.
3. Press and hold the “Unlock” tab on the driver’s side door as you insert and remove the key from the ignition three times.
4. Release the “Unlock” tab.
5. Repeat Step 4 for any additional remotes.

How do you program a remote for a 2005 Chevy Malibu?

Insert the key in the ignition. Turn the key to the “On” position and then “Off” position and then repeat. This will activate the key fob programming mode. Release the unlock switch on the door.

How do you program a key fob?

How to Program a Key Fob in 5 Simple Steps (Car Key Guide)

1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
2. STEP 2-Press the lock button.
3. STEP 3-Turn off the ignition.
4. STEP 4-Repeat the process with other key fobs.
5. STEP 5-Restart the process.

How do you reset a Chevy key fob?

Hold down the “unlock” and “lock” button on your keyless-entry remote until your doors respond by cycling again. This will indicate that the programming was successful. Once the doors cycle again turn the key in the ignition back to “on”. Congratulations, you have successfully programmed your chevy key fob!

How do you reprogram an ignition key?

Programming a Single Key

1. Insert the key into the ignition, and turn it to the on position.
2. Leave the key in this position for 10 minutes and 30 seconds, and then turn it off.
3. Turn the key back on, and wait for additional 10 minutes and 30 seconds before turning it off again.
4. Repeat the process for a third time.

How much does a Chevy Malibu key cost?

In short, replacing a Chevrolet Malibu key can cost between $125 to $410. The cost depends on a number of factors: The type of key you need.

How do you reset a Malibu key fob?

Sit in the car with all of the doors and the trunk completely closed. Turn the key to the “Off” position until the lights on the dashboard go off. Press the “Lock” button within five seconds of entering programming mode and hold the button for one second before releasing it.

Does a 2005 Chevy Malibu have a chip in the key?

The 2005 Chevrolet Malibu does include a transponder chip in the key, though it is only used in the New Body Style version.