How do you fix the EPC light on a 2008 Audi A4?
How do you fix the EPC light on a 2008 Audi A4?
You can reset the sensor with the following steps:
- Turn on the ignition switch.
- Slowly step on the gas pedal all the way to the floor.
- While holding the gas pedal on the floor, turn off the ignition switch.
- While holding the gas pedal on the floor, turn on the ignition switch.
What does the EPC light mean on my Audi A4?
Electronic Power Control
What does the EPC Light mean? EPC stands for Electronic Power Control and when this light illuminates, your car may start showing signs of “loss of power”. This is by design, as the cars’ computer goes into “Limp Mode (safe mode)” to try eliminate any catastrophic damage on your car.
How do I fix the EPC on my Audi A4?
To reset this light, try the following: Turn on the ignition switch, slowly step on the gas pedal until it’s pressed to the floor, and while holding the pedal there, turn off the ignition. Keeping the pedal pressed to the floor, turn the ignition switch back on.
What causes an EPC light on an Audi?
The most common causes of an EPC light on your Audi or VW is a faulty throttle body, a faulty ABS sensor, ABS ring or a faulty brake pedal switch. Here is a more detailed list of possible causes of the EPC Light. Throttle body failure; Bad ABS Sensor – Common on newer VW Passats; Failed brake pedal switch – Common problem on Golf 4 & Fabia
What causes EPC light to go out on Volkswagen Golf 4?
There are several different causes when it comes to the EPC light as mentioned before. The most common problem with Volkswagen cars when the problem appears is a faulty ABS Sensor or ABS Ring. Failed brake pedal switch – Common problem on Golf 4 & Fabia A failed brake pressure sensor (Inside the ABS Module)
What does the EPC light on the dash mean?
If you notice your car’s EPC light on the dash, don’t be alarmed if there are other warning lights on as well. Because the EPC system works in conjunction with other vehicle systems, a problem with the EPC can trigger other warning lights to come on.
Why does my EPC light keep coming on?
The EPC (Electronic Power Control) light is just a way to tell you that there is a problem with the drive by wire system. The issue could be the throttle pedal position sensor not registering to the computer (ECM). You can reset the sensor with the following steps: