How do I update my IBM HMC?

To upgrade the HMC software, restart the system with the removable media in the DVD drive.

1. Insert the HMC Product Installation media into the DVD drive.
2. In the navigation bar, select HMC Management.
3. In the content area, select Shutdown or Restart HMC.
4. Ensure Restart the HMC is selected.
5. Click OK.

What does IBM HMC mean?

Hardware Management Console
The Hardware Management Console (HMC) is a hardware appliance that you can use to configure and control one or more managed systems. You can use the HMC to create and manage logical partitions and activate Capacity Upgrade on Demand.

How do I upgrade HMC from v8 to V9?

Upgrade the HMC to HMC V9 via Recovery media

1. Select HMC Management.
2. Select Save Upgrade Data.
3. Select media type USB flash drive, then click Next.
4. Click Finish.
5. Wait for the Save Upgrade Data task to complete.

How do I find my HMC firmware version?

Perform the following steps:

1. In the navigation area, open Licensed Internal Code Maintenance.
2. Select HMC Code Update.
3. In the contents area, look for the version and release of your HMC machine code in the Status area.
4. Record the version and release.
5. Continue with Step 2. View existing firmware levels with an HMC.

How do you reset HMC console?

In the Management area of the content pane, select Shut Down or Restart the Management Console. From the Shut Down or Restart window, you can: Click Shutdown to end all tasks running on the console and shut down the HMC. Click Restart HMC to end all tasks running on the console and restart the HMC.

What is HMC in mainframe?

The Hardware Management Console (HMC) is a hardware appliance that you can use to configure and control one or more managed systems. The HMC also provides terminal emulation for the logical partitions on your managed system.

What is the full form of HMC?

HMC Full Form

What is IBM Vio?

Virtual I/O (VIO) server is a virtualization technology by IBM. A Virtual I/O server is a logical partition (LPAR) that runs a trimmed-down version of the AIX operating system. Virtual I/O servers have APV support, which allows sharing of physical I/O resources between virtual I/O clients.

How do I update my HMC remotely?

Procedure

1. Download the appropriate HMC V9 network images and save them on an FTP server.
2. Ensure that you download the following files:
3. Save the upgrade data on the HMC.
4. Copy the upgrade files to the bootable disk partition on the HMC.
5. Restart the HMC to upgrade the code that is copied to the bootable disk partition.

How do I backup my HMC profile?

If you are using an HMC Classic or HMC Enhanced interface, complete the following steps:

1. From the navigation area, click Systems Management > Servers.
2. From the content pane, select the required managed system.
3. Click Tasks > Configuration > Manage Partition Data > Backup.

How do I log into VIO server?

When the VIO server is up, log in with the padmin user ID and set its password….

1. Log in to the VIO servers as padmin .
2. Check your device list with the lsdev command.
3. Check the attributes of the virtual Ethernet adapters with the lsdev –dev entX –attr command to confirm which adapters are which.

How do I reset IBM HMC?