How do I reset my Plantronics Discovery 975?

Press and hold the power button for about 5-6 seconds until the light on the headset starts flashing an alternating red-white.

How to pair Plantronics 975?

Put the 975 headset into pairing mode – With the 975 headset on, press and hold Call Control Button until the headset begins to flash red and white. Select “Add new device” on your phone. Select the Plantronics 975 headset when prompted. Enter “0000” as passcode.

How do I pair my Plantronics 925?

Put headset into pairing mode – With headset off, press and hold Call Control Button until the headset begins to flash red and blue. Select “Add new device” on your phone. Select the Plantronics headset when prompted. Enter “0000” as passcode.

How do I turn off my Plantronics Bluetooth headset?

Holding the call control button for 3 seconds turns the headset off. Note: The headset has to be in the ear to hear the turn off “beep” confirmation – this occurs in approximately 3 seconds.

Why is my Plantronics headset not connecting to PC?

Unplug the headset from the PC’s USB port and reboot the computer. Do not just restart – perform a complete system shutdown and then turn back on, as this will help clear the memory in the USB ports. Plug the headset directly into the PC and not into a hub or docking station.

Why wont my Bluetooth headphones turn off?

Press and hold the main button on the Bluetooth headset for several seconds. If it still doesn’t turn off, consult your Bluetooth headset manual for model-specific instructions.

Why did my headset stop working PC?

Dust, lint and dirt may block the connection between the jack and the headphones. Check for this and clean the jack using a cotton swab damped with some rubbing alcohol to get the lint and dust out, or use a can of compressed air if you have one close by. Plug the headphones back in and see if they work.

How do I reset my PLT focus?

Step 1: Press the Talk Button and push the Mute Button in for 5 seconds until the Talk Indicator Light begins to flash green. Release both buttons. Step 2: Press the Talk Button again and release. Step 3: The last step is to unplug the AC power adapter for 5 seconds, then reconnect.

How do you reset the rockerz 255?

Disconnect the micro-USB cable, turn off the headset, then press and hold the button and – button simultaneously for more than 7 seconds. The indicator (blue) flashes 4 times ( ), and the headset is reset to the factory settings. All pairing information is deleted.

Why is my Bluetooth paired but not connected?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.

Why did my headset suddenly stop working?

How do you fix headphones that stop working?

Ruling Out Phone or PC Settings

1. Try another pair of earphones. The first step is to get a pair of perfectly working earphones and connect them to your device.
2. Restart the device. Another simple fix you may want to try is restarting your device.
3. Check the settings.
4. Clean the headphone jack.

https://www.youtube.com/watch?v=oYbUm-83swo