How do I reset my Huawei E960 router?

All you need to do is to reset your E960 modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings.

How do I force reset my Huawei router?

To perform a factory reset, please follow Below steps.

1. Power on the Huawei Router, place a paper clip or Pin into the hole on the back of the Router labeled Reset.
2. Hold paper clip or pin down for 10 to 15 seconds and release.
3. The Router will reboot on its own.

Where is the reset button on Huawei router?

Method 1: Restore your router using the H (or Hi) button Press and hold the H (or Hi) button for approximately 10 seconds until the H (or Hi) indicator turns off, which indicates that the router has been reset.

How do I reset my Huawei router name?

While the router is on, take a bent or straightened paperclip and press down on the reset button for about 10 seconds to begin the reset process. Make sure you hold the reset button down for the entire 10 seconds. If you don’t you might end up only rebooting the router instead of resetting it like you wanted.

How do I reset my Huawei E960 password?

And no need to get your breathing rates high in case you have changed the username / password of Huawei E960 and forgot them, as you can just reset the Huawei E960 router by press-and-hold the reset button with a clip for about 15 seconds.

How do I log into my Safaricom router?

Open an Internet browser on your phone or computer. Enter 192.168. 3.1 in your browser address bar and press the Enter key. In the login window, enter the login password for your router and select Log In.

What happens if I reset my Huawei router?

If your router is restored while the Retain key settings option is enabled, key information such as Wi-Fi name and password will be retained. Nevertheless, after your router is restored, you would still need to complete the configuration process before you can access the Internet.

How do I check my Fibre balance at home?

Here is how you check monthly usage: Open your phone app. Dial *400# Select 0 for My Usage.

How do I configure my Huawei router?

The router’s Wi-Fi name should begin with “HUAWEI” and does not require a password. Open the HUAWEI AI Life App and go to CONFIGURE > SET UP. If a notification prompt does not appear, touch the Add button in the upper right corner of the app’s home screen. Follow the wizard to complete the configuration.

What to do after resetting the router?

After pressing the Reset button, unplug and re-plug the router’s power adapter. NOTE: The Power LED of the router will keep on blinking for a few seconds after resetting as it is still trying to stabilize. However, if the Power light still isn’t solid after a minute, powercycle the router.