How do I reset my fi8918w?

1) Press and hold down the RESET BUTTON about 10 seconds. when released the IP camera will be reset back to factory default settings. You must power on the camera before reset.

How do I reset my Foscam password?

The only choice you have is to perform a hard reset. If it is an indoor Foscam camera, you will keep it powered on, and hold the reset button underneath for about 15 seconds. Once it reboots, you can release the hold, and it will restore to the default settings having no password and ‘admin’ as the username.

How do I connect my Foscam to my phone?

Before moving forward with the camera setup verify the following steps are completed.

1. Download the Foscam App from the Apple Store or Google Play Store and install it to the cellphone.
2. Apply power to the camera and allow it to complete the self-test.
3. Verify the camera is set to the factory settings.

What kind of camera does the Foscam fi8910w have?

The Foscam FI8910W Wireless Pan/Tilt Indoor IP Camera features high quality video and audio, wireless N connectivity, pan/tilt, remote internet viewing, motion detection, night vision, embedded IR-Cut filter, as well as a built in network video recording system.

How to set up a wireless Foscam camera?

Wireless Connection Setup Foscam Digital Technologies LLC FI8910W Quick Installation Guide – 9 – Wireless Settings Step 3: Click on the Submit button after all settings have been entered. The camera will restart after 30 seconds. Once the countdown ends, take the network cable out of the camera.

Where do I Find my Lan IP address on Foscam?

The LAN IP address will disappear on the window of IP Camera Tool when the camera is configuring a wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of the camera will show again on the window of the IP Camera Tool.

How to reset the Foscam factory username and password?

Figure 1.3 Reset button: Press and hold down the RESET BUTTON for 15 seconds. Releasing the reset button, username and password will back to the factory default administrator username and password. You must power on the camera before reset. Shenzhen Foscam Intelligent Technology Co., Limited Tel: 86 755 2674 5668 Fax: 86 755 2674 5168 3