How do I program my Radio Shack Pro 2096 scanner?

How to Program Radio Shack Model 2096 Police Scanner

1. Turn on your scanner and press the “PROG” button.
2. Scroll through the different channels.
3. Press any number key along with the “./DELAY” button to enter the frequency you want to store.
4. Press the “ENT” button to store the frequency.

How do you program a realistic Pro 41 scanner?

How to Program a Realistic Scanner

1. Install fully charged batteries.
2. Press the button marked “Manual” on the scanner keypad.
3. Use the keypad to enter the channel number you want to program and press “Manual” again.
4. Press the “./Clear” button to clear the screen and prepare for the new frequency.

Is the pro-2096 a digital or analog scanner?

The PRO-2096 follows both digital and analog systems, including 9600bps control channel and C-QPSK modulation. As of Jan 2009, this scanner was on clearance by RS. Also see the Pro-96 page. All utilities and links listed there also apply to the PRO-2096.

When was the radio shack pro 2096 discontinued?

The Pro-2096 is discontinued and was manufactured for Radio Shack by GRE America Inc The PRO-2096 follows both digital and analog systems, including 9600bps control channel and C-QPSK modulation. As of Jan 2009, this scanner was on clearance by RS.

What kind of scanner is the Radio Shack Pro 96?

From The RadioReference Wiki The Pro-96 is discontinued and was manufactured for Radio Shack by GRE America Inc. The Radio Shack is a Digital Trunk Tracking scanner which boasts the ability to track APCO 25 digital trunking systems, in addition to following Motorolatype I/II systems and EDACStrunking systems.

Is the pro-96 compatible with the trunking system?

This scanner is compatible with the following Trunking System Types and System Voices used in the RadioReference Database, of course you must verify that the scanner will cover the appropriate frequency range: The Tap Point for a PRO-96, is in the exact same place as the Tap Point for the PRO-95.