How do I pair my Verizon remote to my TV?

Stream TV – Pair Voice Remote

1. If the ‘pairing your remote’ screen doesn’t display, place the Stream TV in Bluetooth® discovery mode with the existing voice remote or the remote control app.
2. Press and hold the center (OK) button and Menu button simultaneously for 6 seconds.
3. Release the buttons to enter pairing mode.

How do I program my FiOS remote without a code?

How to Program a FiOS Remote Control Without a Code

1. Turn on your TV or other device that you would like your FiOS remote to control.
2. Press and hold the corresponding device button on the remote.
3. Enter the code “922” using the remote’s numbers.
4. Point your FiOS remote at the device you are programing.

How do I program my FiOS remote for volume?

To find it, press Menu, scroll down to Customer Support, then select Help Topics, then Remote, then Setting Up your Remote. Choose the option that best describes your FiOS remote, then select Volume Control. You will see step-by-step instructions on how to set your remote to control your receiver’s volume.

Why is my Verizon remote not working?

The batteries in your remote control may have become dislodged or are drained. Open the battery cover and make sure the batteries are properly seated. If the top of your remote flashes briefly, the batteries are working. If the top of the remote does not flash, your batteries need to be replaced.

How do you set up Verizon TV?

To verify your service is up and running, open an Internet browser and go to Activate.verizon.com. Next, install a set-top box on your main TV to begin your home entertainment experience. Turn on your set-top box and TV. Using your Fios TV remote, follow the on-screen instructions.

How do I sync my cable remote to my Samsung TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

How do I get my remote control code?

How to Find a Code for My Remote Control

1. Look through the User’s Manual for your remote control to find the code section.
2. Go to an website listing code, such as the Remote Code List (See References).
3. Call the manufacture of your remote and ask whether it can tell you the codes you need.

How do I program my Verizon P265 remote?

Set up your P265 Remote Control

1. Find the remote code for your TV in the list of Remote control codes for Verizon P265.
2. Turn on your TV and the FiOS TV Set-Top Box.
3. Press and hold the OK and 0 (zero) buttons at the same time.
4. Enter the remote code for your TV that you located in step 1.

How do you program remote?

Turn on your TV or another device you wish to control. Press and hold the corresponding DEVICE and POWER buttons on the remote at the same time. Wait until the power button comes on and then release both buttons. Pointing the remote at the TV or another device, press the Power button on the remote and wait 2 seconds.

Why is my FIOS remote volume not working?

Try resetting the remote. Hit “Menu” on your remote, select “settings” then “voice control” then “Fios TV voice remote” then “Program Fios TV Voice Remote” then “reset remote setup.” After resetting, redo previous steps this time selecting “manual setup” following instructions to complete that setup.

How do I set up my Verizon remote control?

Set up your remote using the listed remote code Find the remote code for your TV in the list of Remote control codes for Verizon P265. Turn on your TV and the FiOS TV Set-Top Box. Press and hold the OK and 0 (zero) buttons at the same time. Enter the remote code for your TV that you located in step 1.

How do I program my FiOS remote?

Turn on your TV by pressing TV Power then press VOL+ and VOL- to see if TV responds. Also test MUTE and A/V. If any button doesn’t work, press and hold until it does. Press OK to save code programming. The red LED light blinks 3 times and turns off. You have successfully programmed remote control for your TV.

How do you program FiOS remote control?

How to program your remote control Please read all instructions before starting. Turn on your TV and Fios Set-top box. Press and hold TV key for 6 seconds. Each device key will light up, then the TV key will remain on. Press the Power button on your remote. The device button will blink three times then turn off.

How do you program a DirecTV remote to a TV?

Turn on your TV and DirecTV box. Press “Menu” on your remote. Navigate to “Parental, Favs and Setup” and choose “System Setup.”. Pick “Remote” and select the option to program it. 2. Slide the switch on top of your remote control to “TV” mode.