How do I know what bearings my trailer has?

The easiest way to determine which bearings are used on your trailer axle is to take the hub off and check for the numbers stamped into the bearings. If the bearing numbers cannot be read, the next best solution is to find the bearings’ inner diameter.

How much does it cost to get trailer bearings repacked?

Trailers tend to be cheaper to repack professionally (think $100-$200), but don’t underestimate the power of the upsells a mechanic might try to give you. If you’re serious about cash, you can likely save a few bucks by repacking your bearings yourself.

What happens if you over tighten trailer bearings?

We recommend tightening the castle nut down until it stops, and then backing it off to the next notch wheel the tang washer will fit into the castle nut. Over tightening the nut can lead to the spindles and bearings overheating, which can damage them.

Can you over grease a trailer bearing?

There’s no such thing as too much grease for bearings! It should be a tight fit to where you would have to use a tool or block of wood to get the grease cap in place. If one side is in further in the hub than the other side of the same cap then eventually it will work itself free.

How do I know if my trailer bearings need replacing?

Check wheels for side-to-side looseness – There should be a very slight amount of play in the wheel, typically 1/8-inch or less. If the wheels are loose or spin with a wobble, the bearings must be serviced or replaced.

How long should trailer bearings last?

With proper and frequent maintenance, your wheel bearings should last for 100,000 miles before they wear out. How Much Grease to Put In A Trailer Wheel Bearing?

How long does it take to repack trailer bearings?

if he has all the seals/bearings/races laid out, it should take roughly 1-2hours max per hub, including taking the wheels off/on, cleaning all surfaces well, and driving the old races out/new in.

How warm should trailer bearings get?

About 130-140 is too hot to touch and anything above that probably too hot for a wheel bearing. Compare it to your hot water temp at home. If you can’t touch the wheel then I would consider them too hot… warm to the touch is OK.

How do I know if my trailer bearings need grease?

Keep your hand on the wheel and spin it. If you feel any motion that is not smooth, hear any noises, or if the wheel does not spin freely, the wheel bearing is defective or needs lubrication.

How often should I grease my trailer bearings?

When Should You Grease Your Bearings With a larger travel trailer, you should grease your trailer wheel bearings every 10,000 miles or once a year, whichever comes first. If you have a smaller travel trailer, however, you’ll need to grease your wheel bearings every 2,000 miles.

What kind of bearing Kit do I need for a 7000 lb trailer?

Trailer Axle Wheel Bearing Kit #333951 Lippert Precision Tapered Roller Bearing Kit for 7000 lb. trailer axles. Includes: 2 bearings (Inner 25580 – Outer 14125A), 2 races (Inner 25520 – Outer 14276) , seal, and cotter pin. Big Tex Tapered Roller Bearing Kit for 6000 lb. trailer axles.

What kind of wheel bearings do I need for venture trailer?

Venture Metric bearing kit for Venture Trailer models VB-1000, 1300 and VW-1200 2006-2012. May be used with other brand 25mm Metric trailer hubs. Kit contains components to repair one complete hub including both bearings.

How to read reviews for masterpro trailer bearing kit?

Read reviews for MasterPro Trailer Bearing Kit When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures. When autocomplete results are available use up and down arrows to review and enter to select.

What kind of wheel bearings does a Big Tex trailer use?

Big Tex Precision Tapered Roller Bearing Kit for 7200 lb. or 8000 lb. trailer axles. Kit contains components to repair one hub. Includes: 2 bearings, 2 races, triple lip seal, and cotter pin. Big Tex Precision Tapered Roller Bearing Kit for 9,000 lb. or 10,000 lb. trailer axles. Kit contains components to repair one hub.