Guidelines

How do I interface a Bluetooth module in Proteus?

by Rhyley Bryan

How do I interface a Bluetooth module in Proteus?

How to Simulate Android Arduino LED Control Via Bluetooth in…

  1. Step 1: Requirement. 1-Arduino IDE.
  2. Step 2: The Circuit. Proteus files attached.
  3. Step 3: The Code. Here’s the code,using Codebender.
  4. Step 4: Android Application.
  5. Step 5: Configure PC Bluetooth.
  6. Step 6: Proteus Simulation.
  7. 1 Person Made This Project!
  8. 5 Comments.

How do I connect my HC-05 to my mobile Bluetooth?

Follow these mini-steps:

  1. Connect the Rx and Tx pins of HC-05 back to Arduino (if you haven’t did this already).
  2. Pair the device with your mobile phone (in my case I am using Android OS and my phone is Samsung SII).
  3. Download “Bluetooth Terminal” app from Google Play Store.
  4. Open Bluetooth Terminal app.

What is HC-05 Bluetooth module?

HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Its communication is via serial communication which makes an easy way to interface with controller or PC.

How do I download Proteus Bluetooth library?

Abid JamalFollow

  1. Download Library Files ( A zip folder )
  2. Paste these two files BluetoothTEP.
  3. If you are using Proteus 8 then Library folder will be within the data Folder (Proteus 8 Professional\Data\LIBRARY ) OR ProgramData (C:\ProgramData\Labcenter Electronics\Proteus 8 Professional\LIBRARY)

How do I add a library to Proteus?

  1. Step 1: Download Library Zip Folder From Our Website. Download the Library Files zip Folder from our website, open it and paste these two files ARDUINO.LIB and ARDUINO.IDX files in to Library folder.
  2. Step 2: Done. Now open Your Proteus and Search Arduino.
  3. Step 3: Make Hex File.
  4. Step 4: Upload Code.

How do I use Virtual Terminal in Proteus?

How to Use Virtual Terminal in Proteus ISIS?

  1. First of all open the Proteus ISIS and click on the P button to search for the components, as we seen in previous tutorials.
  2. Now in the search box type “COMPIM” , when you search this a result will show up as shown in the below figure:

What is the difference between HC-05 and HC-06?

The HC-05 can be a master or slave. The HC-06 is a slave only. This means the HC-05 can initiate a connection to another device and the HC-06 can only accept a connection from another device.

How do I connect my phone to my Bluetooth module?

Before being able to use the Android application, you need to pair the Bluetooth module with your smartphone. Power the Arduino board, turn on Bluetooth on the Android phone and search for Bluetooth devices nearby: the JY-MCU module will present itself as HC-06, the pairing password is 1234.

How long the HC-05 Bluetooth module signal can connect with a device?

Usually, it is used to connect small devices like mobile phones using a short-range wireless connection to exchange files. It uses the 2.45GHz frequency band. The transfer rate of the data can vary up to 1Mbps and is in range of 10 meters. The HC-05 module can be operated within 4-6V of power supply.

How do I add an IR sensor library to Proteus?

If you are using Proteus 8 software, then you should have a look at How to add new Library in Proteus 8 Professional.

  1. Once you have added the files in the Library folder, then restart your Proteus software.
  2. In the components section, make a search for Infrared Sensor, as shown in below figure:

How do I open a library in Proteus?

How to use hc-05 Bluetooth module in Proteus?

Simulate android app with hc-05 blueooth module simulation in proteus. First add bluetooth device using bluetooth menu. then run simulation to connect with a… Simulate android app with hc-05 blueooth module simulation in proteus. First add bluetooth device using bluetooth menu. then run simulation to connect with a…

What does the hc-05 Bluetooth module come with?

Generally, the HC-05 Bluetooth Module, or the HC-05 Sub Module, to be precise, comes with the BC417 IC along with a flash memory. Such Modules come as surface mount board and several third-party manufacturers use these board to build a more complete system with necessary pins and components.

How are Bluetooth modules used in Proteus Isis?

Using this Library, now you can quite easily use Bluetooth modules in Proteus ISIS. I have designed two Bluetooth modules which are HC-05 and HC-06. We all know about these modules. We use these modules for sending data through Bluetooth.

Can a hc-05 BT be used as a slave?

At default mode, the HC-05 BT will act as a slave. By using a default password, the device will connect. To use the module as a master, it should be in command mode. The master mode is not common in every Bluetooth module. HC05 is one of its kind.