Guidelines

How do I install XBee library on Raspberry Pi?

How do I install XBee library on Raspberry Pi?

Install your software. Configure your XBee modules. Run your first XBee Python application….Install your software

  1. Python 3.
  2. PySerial 3.
  3. SRP.
  4. XBee Python library software.
  5. XCTU.

How do I connect Zigbee to Raspberry Pi?

Attach the two Zigbee’s to the two dongle’s and connect one pair on the USB port of the Raspberry Pi2. Connect the other pair to the USB port of a computer or a Laptop. Install the FTDI Driver on the Computer /laptop to provide usb communication.

What is the range of XBee?

Regular, Pro and other things

XBee Device Range Frequency
XBee Pro 60mW Wire Antenna – Series 1 1 Mile 2.4GHz
XBee Pro 900 RPSMA (retired) 6 Miles 900MHz
XBee Pro 900 U.FL Connection (retired) 6 Miles 900MHz
XBee Pro 900 Wire Antenna (retired) 6 Miles 900MHz

Can a Raspberry Pi connect to a Digi XBee?

Features Fully compatible with Raspberry Pi models that have the 40-pin GPIO header (3, 2, B+, A+, Zero) With the authentic Digi XBee footprint, you can connect any Digi XBee module. You can communicate with the XBee module directly via micro USB, thanks to FTDI USB to UART converter chip.

Which is the RSSI pin on the XBee?

XBee module’s pin 6 can be configured as an RSSI pin that outputs a PWM (pulse-width modulation) signal representing this value. To do so, configure P0 pin of XBee as RSSI. USER (U.BUT): This push button connected to GPIO24 and pulled up HIGH state by default.

How can I connect my XBee module to my laptop?

To connect XBee module with the laptop, a USB to serial converter or specifically designed explorer board is used. Just hook up the XBee module to the Explorer board and plug it with the laptop using USB cable.

Is the Arduino XBee shield compatible with Zigbee?

The Arduino XBee shield allows your Arduino board to communicate wirelessly using Zigbee. It was developed in collaboration with Arduino. This documentation describes the use of the shield with the XBee module.