Are concrete floors cheaper?

Economical. The cost of concrete floors is very low, about $2 to $6 per square foot to polish a plain gray slab, giving it a lustrous sheen. The concrete’s tonal differences, subtle cracks and aggregates take on a stonelike, natural feel. More elaborate finishes cost around $5 to $8 per square foot.

How thick should a concrete second floor be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

Can you have polished concrete floors upstairs?

Can you have polished concrete floors on the second level of a house? Yes, you can.

Why are concrete floors bad?

However, if not properly sealed, the concrete can be very susceptible to penetration by moisture. As liquid makes its way into the pores of a concrete floor then it can lead to the appearance of mildew or moisture freezing which can lead to cracks in the floor.

Is it OK to put concrete flooring on second story?

They work great for radiant heat and are virtually maintenance free. With the addition of glazes or polish, your concrete floor can fit your minimalist personality or your classic traditional style. Pouring a concrete floor, especially on the second story, is no job for a newbie.

How to make a second floor concrete slab?

Floor slabs wbdg whole building design guide concrete floor slabs construction magazine solved 1 3 the second floor of a light manufacturing bui structure magazine a practical design for thin composite steel structure magazine a practical design for thin composite steel concrete floor requirements 2 post and 4 lifts bendpak.

What to do with concrete overlay on 2nd floor?

Install all bottom plates for the partitions and pour over them. Install wood blocks where you will need to penetrate the floor later for plumbing or wiring. Install your sheet metal and fill the openings with 2″ foam, well taped into the metal. Plan on cutting your new slab to control random cracking.

What’s the best way to lay concrete flooring?

A shower liner or plastic on a roll that is at least 4mm thick will work fine. Tack the plastic at least six inches up the wall. Plan the time for the cement to be delivered and lay your cement forms. Make sure to cover opening for doorways and duct work. Mark the walls surrounding the floor at the predetermined height of the floor.

https://www.youtube.com/watch?v=uGU8xgJykO0