Why is my staple gun not firing?

When any important part is broken or worn out, the tool simply won’t work. Before you start using a staple gun, check to ensure the spring, hammer, and rail are correctly assembled and undamaged. Small variances can gum up the works and cause staples to jam or defeat the spring or hammer mechanisms.

How do you replace a spring on a staple gun?

Contents show

1. 5.1 Turn Off The Power Source.
2. 5.2 Destroy Your Staple Gun.
3. 5.3 Remove The Jammed Staple.
4. 5.4 Fill Your Staple Gun.
5. 5.5 Close Up Your Staple Gun.
6. 5.6 Control Up Your Staple Gun.

What staples fit duo fast staple?

Staples for Duo-Fast

• 15 Series 7/16″ Crown.
• 18 Series 1/4″ Crown.
• W-18 Series 3/8″ Crown.
• 54 Series 3/16″ Crown Carpet Staples.
• 75 Series 15/32″ Crown Carpet Pad Staples.
• 76 Series 7/16″ Crown.
• DF 15 Series 1/2″ Crown Flooring Staples.
• GC20 Series Corrugated Fasteners.

How do you fix a stapler that won’t staple?

If unable to shake the jammed staple out, try to staple a single sheet of paper while the unit is jammed. This could possibly force the jam outward, clearing the unit. If this does not work, try using any sizable tool or nearby accessory, try to fish out the jammed staple through the “front teeth” of the stapler.

How do you fix a stapler problem?

Use a sharp object to push the jammed staple up from the bottom. Any of the following should work: tweezers, scissors, a flathead screwdriver, or needle-nosed pliers. Push the prongs of the jammed staple upward to try and loosen it from the grip of the stapler.

Will Arrow staples work in a duo fast staple gun?

No it does not. Arrow takes a t-50 Duo-fast takes it own.

Who makes Duo fast?

Illinois Tool Works, Inc.
In 1999, Duo-Fast Corporation was acquired by Illinois Tool Works, Inc., a diversified manufacturer of engineered components and systems, including many specifically for the construction market. And in 2020 Duo-Fast was incorporated into the Paslode family of products.

How do I get my stapler to work?

Insert the strip of staples, points down, into the staple channel and close the top of the stapler, the magazine will slide back into its correct position and you’ll hear a small click. Some of our staplers, such as the Zero 01 or our range of Heavy Duty staplers, are front loading.

Why is my stapler stapling backwards?

The setting most people use is the one that causes the legs of the staple to bend inward to hold a stack of papers firmly together. This is the “staple” or “reflexive” setting. If the user reverses the strike plate, the staple’s legs will splay outwards when they come through the paper. This is the “pinning” setting.

How do you fix a stapler that won’t open?

Hold the top of the stapler magazine with two fingers and slowly, while maintaining firm pressure, start pulling the lid apart from the part of the magazine that holds the staple. Be careful not to do this too quickly, or the lid might again fly open, spraying the staples all over your office or desk.

What are the O rings on the duo Fast stapler?

All the O-rings in the tool + cylinder seal. Tool breakdown and O-ring reference sheet include. Price includes shipping in the US. Aftermarket O ring and Bumper kit to overhaul the Duo-Fast 7664 stapler. Includes all the orings in the tool + Bumper MS-110-5P Make: Duo-Fast Model: 7664 A, E, D, Z NOTE: This kit does NOT work with the DS-7664BP

Where can I buy duo Fast tool parts?

Shop Duo-Fast Parts online by tool, model, and schematics. Tool Parts Direct carries 5,800 Duo-Fast parts and over 150 Duo-Fast power tool schematics.

Why do you need duo fast carpet fasteners?

For over 50 years, professional carpet installers know they can rely on DUO-FAST tools and fasteners for all of their carpet, pad and underlayment installation needs. Industrial applications require tools and fasteners that provide power, durability and reliability.

What do you need to know about duo Fast Nailers?

DuoFast manufactures innovative, professional quality fastening systems for residential framing applications. Our product offering includes pneumatic framing nailers, powder actuated tools, and a complete line of fasteners, designed to improve jobsite productivity and drive business results.