Why does my Nikon say fee?

The FEE error indicates that the camera cannot control the full range of the lens aperture. If your lens has a mechanical aperture ring, rotate the aperture to its smallest opening, or highest f-number – normally marked in orange. Also, be careful not to press the lens release button as this may cause the error.

Why does my Nikon say error?

If an “Err” message is displayed on a camera’s control panel and viewfinder display, this generally indicates that the cameras internal performance monitor has detected a problem. This message can indicate either a temporary or serviceable camera problem.

What does f33 mean on Nikon?

That’s the Nikon error message for a lens with aperture ring set to something other than the minimum (i.e. highest number). The camera insists on controlling the aperture ring, and to do so, the ring must be set to the minimum setting.

What does EE mean on camera?

Thanks. Aug 17, 2009. Your FTbN is a match needle full aperture metering camera.

Why do I get a fee error on my Nikon camera?

1. Fee error message: Nikon Fee error is something that appears on the camera LCD when the camera cannot fully control the range of lens aperture. It tells about a fact that the camera is unable to capture the shoot in this aperture and you need to change the one for capturing the image.

Why is there a fee error on my Nikon D750?

Part 1. Common Errors in Nikon D750/D80/D90/Fee 1. Fee error message: Nikon Fee error is something that appears on the camera LCD when the camera cannot fully control the range of lens aperture. It tells about a fact that the camera is unable to capture the shoot in this aperture and you need to change the one for capturing the image.

Why does my Nikon DSLR say f — error?

Being the error message exclusively linked to the Nikon DSLR cameras, The F—error message is the one that appears on the camera LCD when there exists an issue in the connection between lens and camera. If the lens is not connected with the camera properly, it is not going to work.

What does fee mean on Nikon DX 35mm?

When I put it on the camera the display shows ‘fEE’, which is supposed to be “Lens aperture ring is not set to minimum aperture” (which, it is). The DX 35mm lens works fine.