Which is an example of Classful subnet mask?

A Class B subnet mask is 255.255. 0.0, which means there are 16 bits available for the network and 16 bits available for the hosts. And a Class C subnet mask is 255.255. 255.0, where there are 24 bits that are available for networks and 8 bits available for hosts.

What are the types of Classful addressing?

In Classful addressing, the address space is divided into five classes: A, B, C, D, and E. Each of these classes has a valid range of IP addresses. Classes D and E are reserved for multicast and experimental purposes respectively. The order of bits in the first octet determine the classes of IP address.

What is a network address example?

A network address is also known as the numerical network part of an IP address. For example, in the IP address 192.168. 1.0, the network address is 192.168.

What are some examples of IP address?

An IP address is a string of numbers separated by periods. IP addresses are expressed as a set of four numbers — an example address might be 192.158. 1.38. Each number in the set can range from 0 to 255.

What are the different types of Classful addressing?

The Classful address is divided into five types: Class A, Class B, Class C, Class D, Class E. This classification is known as Classful addressing or classes of IP address in IPv4 . The first three-class that are Class A, B and C are used for public addressing in which the communication between source and destination is always one-to-one .

Which is an example of Classful addressing in Cisco?

For example in 192.168.1.0/30 your classful addressing would dictate that it’s a Class C address (24 network bits) with 64 available subnets (2^6=64 subnets) with 2 hosts per subnet (2^2-2=2).

What is the difference between classful and classless IP addresses?

Classful addressing categorizes the IP addresses into five major classes: class A, B, C, D, and E. Class A addresses allocate first 8 bits for the network and the remaining bits for the host. Class B addresses allocate first 16 bits for the network and the remaining bits for the host.

How is the classful network used in the Internet?

Classful network. A classful network is a network addressing architecture used in the Internet from 1981 until the introduction of Classless Inter-Domain Routing in 1993. The method divides the IP address space for Internet Protocol version 4 (IPv4) into five address classes based on the leading four address bits.