What ports do NVR use?

NOTE: 85, 8000, and 554 are the default ports of your DVR or NVR. 85 is the HTTP port, 8000 is the Server port, and 554 is the RTSP port.

How do I port forward HIK?

How to: Configure Port Forwarding on a Hikvision Recorder

1. Log in to your DVR as the admin (default password is 12345).
2. Open the Main Menu, click the Configuration button, Network and then General.
3. Tick the box which says DHCP.
4. Click the Apply button in the bottom right of the screen, now close the menu.

What ports need to be open for CCTV?

Common IP Camera and Security Camera DVR Ports

• 80 Default Port For Most IP Cameras.
• 7000 iDVR-E Recorders.
• 5554, 8080 iDVR-PRO Recorders.
• 80, 5150, 5160 Zavio Network Video Recorders.
• 80, 4550, 5511, 5550, 6550, 8866, 56000 Geovision GV-iView iPhone & iPad App.

Does HIK-connect require port forwarding?

By using this service you can view your security cameras remotely from your mobile phone without the need of port forwarding configuration. The Hik-connect replaces the iVMS-4500 platform with better features.

What are the ports for the Hikvision DVR?

Having trouble with your Hikvision remote viewing capability because of the DVR Port Forwarding in the router? You will need to open up the following ports : HTTP Port = 80. Server Port = 8000. RTSP Port = 554.

Why is my Hikvision recorder not opening up?

And UPnP Status will be Active. If the UPnP status is still Inactive, then it means the port didn’t open up. Method 2. Configure Port Forwarding Manually Step 1. Go to Configuration > Advanced Configuration > Network -> General to correctly configure network parameters to make sure your device is accessible in LAN.

What is port 80 on a Hikvision recorder?

For example, port 80 is commonly used for HTTP. Users are recommended to change to a customized port on their devices. Let’s say, instead of port 80, modify to port 8080 or something else. There are two ways to open up the ports for your Hikvision device.

Where do I find the ports for my NVR?

Login to your NVR (or DVR) via the web browser. Type the IP address or the DDNS address on the url bar then enter your username and password. Navigate to Configuration > Network > Basic Settings and select the Ports tab. As you can see on the picture you can modify them as you wish. For example in our case, the http port is 82.