What is SAE 660 bronze?

SAE 660 Bronze or C93200 as it also commonly known is a high-leaded tin/ bearing bronze. This Bronze has good hardness and strength qualities as well as good wear resistance, it also has excellent machining properties and anti-friction qualities.

What is C93200?

C93200 Bronze is a general purpose bearing alloy possessing good anti-friction properties, ample strength and hardness, adequate ductility and excellent machinability. It is used as bearings, bushings, light duty gears and sprockets, impellers, wear strips, plates, automotive fittings and washers.

What is phosphor bronze used for?

The phosphor bronzes have superb spring qualities, high fatigue resistance, excellent formability and solderability, and high corrosion resistance. They are primarily used for electrical products, other uses include corrosion resistant bellows, diaphragms, and spring washers.

Does phosphor bronze contain lead?

It is composed of copper that is alloyed with 0.5–11% of tin and 0.01–0.35% phosphorus, and may contain other elements to confer specific properties (e.g. lead at 0.5–3.0% to form free-machining phosphor bronze)….External links.

What is ASTM B584?

ASTM B584, 2014 Edition, April 1, 2014 – Standard Specification for Copper Alloy Sand Castings for General Applications. This specification covers requirements for copper alloy sand castings for general applications.

Is brass the same as bronze?

What are brass and bronze? Brass and bronze are both metal alloys, which means they are a combination of two or more different metals. Brass is composed of copper and zinc, whereas bronze is made up of copper and tin, sometimes with other elements such as phosphorus or aluminium added in.

Is phosphor bronze harder than brass?

While brass is valued for its malleability, phosphor bronze lends a greater hardness. As a harder metal, phosphor bronze has a higher melting point than brass. Some of the key properties of phosphor bronze are corrosion resistance, fatigue resistance, and excellent elasticity.

When should I use bushings?

Bushings are widely used for heavy-duty wheels that require high load-bearing tolerances. Bushings are self-lubricating, and therefore ideal for low-maintenance or maintenance-free operations. Self-lubrication is achieved through a uniform pattern of indents on the surface of the bushing that act as grease reservoirs.

What material is best for bushings?

Bronze remains a popular choice for bushings because it’s available in so many alloys and compositions, expanding its reach into even more applications. A bronze bushing is harder and less likely to break or deform than those made of other materials.

Who is the manufacturer of SAE 660 bronze?

Morgan Bronze Products, Inc. specializes in SAE 660 Bronze. We are an ISO 9001 and AS 9100 registered corporation that stocks SAE 660 Bronze and manufacturers innovative turnkey solutions. Your SAE 660 Bronze is available in rectangles, rounds, tubes and other shapes. C93200 Bronze is also commonly referred to as CDA93200 Bronze.

What does SAE 660 stand for in bearings?

It’s also known as SAE 660 and is often used for bearings, bushings, and thrust washers. For technical drawings and 3-D models, click on a part number. Certificates with a traceable lot number are available for these products.

What kind of bars are in SAE 660?

We stock SAE 660 in flats, round bar, plate, round tube, hollow bar, square bar and hexagon bar. Our knowledgeable staff and resident metallurgists will be pleased to assist you further on any technical topic.

How big is a SAE 660 thrust washer?

1 1/4″ Wall Thick. 1 1/2″ Wall Thick. 1 3/4″ Wall Thick. Diameter is oversized to allow for finishing. Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It’s also known as SAE 660 and is often used for bearings, bushings, and thrust washers.