What is pin header connector?

A pin header (or simply header) is a form of electrical connector. A male pin header consists of one or more rows of metal pins molded into a plastic base, often 2.54 mm (0.1 in) apart, though available in many spacings. Male pin headers are cost-effective due to their simplicity.

What is a header in a PCB?

PCB (Printed circuit board) headers are a type of electrical connector that allows you to join connections to a PCB using a single block. Typically headers have one side that is designed to be surface mounted and soldered onto the board with the other side allowing connections.

What are PCB headers used for?

Also to make an external make/break connection of components/device on a pcb, PCB headers are used. Various kinds of pcb header are available to facilitate a better way of connection. This connectors are best suited for FRC(Flat Ribbon cable) interface. PCB header can also be called as Pin header or Berg Strip.

What is the difference between header and connector?

A header is a shortened form of pin header. The connector is generally what plugs into the header.

What is female header pin?

Pin Header Connectors. Pin header connectors comprise several different means of connection. Right-angle female header pin connection on an FTDI basic board. The most commonly seen pin headers are 0.1″ (2.54mm) single or double row connectors. This is a standard breadboard compatible pitch.

How do I cut a header pin?

How to Cut Pin Headers

1. Step 1: Sacrifice a Header and Pull Its Pin. Count off the number of headers you need, then count one more.
2. Step 2: Cut Through the Sacrificial Header. You now have an empty socket, which you can easily cut with wire cutters.
3. Step 3: Done! Finished and ready to solder.

What are female headers?

These 0.1″ (2.54 mm) female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The standard spacing is the same as on most solderless breadboards and matches 0.1″ male header strips.

Where is a screw connector commonly used?

Screw terminals are used extensively in building wiring for the distribution of electricity – connecting electrical outlets, luminaires and switches to the mains, and for directly connecting major appliances such as clothes dryers and ovens drawing in excess of 15 amperes.

How do I identify a ribbon cable connector?

To measure the pitch of a ribbon cable, measure the cable from outside-edge to outside-edge of the cable, then divide by the number of conductors. Ribbon cable conductors are also called “ways.” This means that a ribbon cable with eight conductors would be called 8-way ribbon cable.

What are the different types of pin header connectors?

Pin header connectors comprise several different means of connection. Generally, one side is a series of pins which are soldered to a PCB, and they can either be at a right-angle to the PCB surface (usually called “straight”) or parallel to the board’s surface (confusingly referred to as “right-angle” pins).

Why are pin headers known as Berg connectors?

In the past, a pin header was known as a Berg connector, but the term fell out of favor because pin headers are manufactured by many companies. Pin headers are often associated with ribbon cable connectors, pin headers often also function as recipients for jumpers.

How are pins bent on dual row pin headers?

On single row pin headers the pins are bent alternating to one side or the other, on dual row pin headers the pins are simply bent outwards. If pin headers are optional, the PTH variant is often chosen for ease of manual assembly. Pin headers can be either straight or angled. The latter form is often used to connect two boards together.

What is the pinout of a USB 2.0 header?

A single port header is a 5 pin [1×5] and has the same pinout as port 1 of standard header, but wtih pin 5 as Shield Drain. It will work in eather port of the header, but port 2 is recomended due to the presence of the Sheild Drain. This is the most common USB 2.0 header (10 pin [2×5],…