What is en08?

EN8 is an unalloyed medium carbon steel grade with reasonable tensile strength. EN8 is widely used for applications which require better properties than mild steel but does not justify the costs of an alloy steel. EN8 can be flame or induction hardened to produce a good surface hardness with moderate wear resistance.

What is EN8 used for?

EN8 engineering steel, also know as 080M40, is an unalloyed medium carbon steel. EN8 is a medium strength steel with good tensile strength. It is suitable for shafts, stressed pins, studs, keys etc.

What material is BS970?

BS970 steel grades are commonly carbon and alloy steels which can be heat treated to achieve a wide range of tensile strengths and mechanical properties. Some stainless steel specifications are also referenced in BS970.

What is difference between EN8 and EN8D?

difference between en8 and en8d material EN8 is through-hardened medium carbon steel. EN8D has enhanced wear resistance and it’s a carbon steel. It is a surface-hardened version of EN8 by induction processes.

What material is 070M20?

mild steel
070M20 grade steel is a general purpose mild steel for welded or riveted structures, forgings, machined parts, hot pressing, etc. This steel will withstand a moderate amount of cold deformation and only offers low strength, but good machinability.

Which is harder EN8 or EN24?

EN24:It is a steel which has Ni-Cr-Mo as an alloying elements. It gives higher toughness than the EN8 steel.

What are the mechanical properties of EN8 steel?

EN8 steel and BS970 080M40 material chemical composition is listed in the following table. En8 and 080M40 steel mechanical properties are listed in the following tables including yield strength (yield stress), ultimate tensile strength, shear strength, modulus of elasticity, young’s modulus, etc.

Is the EN8 steel suitable for shock resistant applications?

EN8 (080M40) is an ideal product for loading applications but is not suitable in shock resistant applications as the material can shear under extreme conditions. EN8 (080M40) offers superior tensile strength when compared to normal bright mild steel which is achieved during the thermo mechanical rolling process.

How many bedrooms do you have in EN8?

A large 3 bed semi detached property located a short walk from amenities, schooling and transport. The ground floor comprises of a living room, family room, well presented kitchen diner & a bathroom suite. The 1st floor offers 3 bedrooms & an en suite. Outside benefits from a lengthy 100ft plus r…

What kind of parts can EN8 be used for?

EN8 is suitable for the manufacture of parts such as general-purpose axles and shafts, gears, bolts and studs. It can be further surface-hardened typically to 50-55 HRC by induction processes, producing components with enhanced wear resistance. For such applications the use of EN8D (080A42) is advisable.