What is a Pontiac 2 plus 2?
What is a Pontiac 2 plus 2?
The Pontiac 2+2 is a full size automobile that was manufactured by Pontiac, built on the B-body chassis. It debuted for the 1964 model year as a trim-only option for the Pontiac Catalina, with special door panels, bucket seats with a center console, and exterior badging.
How much is a Pontiac Parisienne worth?
The Parisienne was largely based on the Chevrolet Impala, and was built in five generations: 1st Gen (1959-1960), 2nd Gen (1961-1964), 3rd Gen (1965-1970), 4th Gen (1971-1976), 5th Gen (1977-1986)….Related Submarkets.
For Sale | 0 |
---|---|
Lowest Sale | $2,200 |
Top Sale | $62,700 |
Most Recent | $26,111 |
Is a Parisienne an Impala?
The Pontiac Parisienne is a full-size rear-wheel drive vehicle that was sold by Pontiac on the GM B platform in Canada from 1958 to 1986 and in the United States from 1983 to 1986. For most of its run, the Canadian Parisienne was nearly mechanically identical to the American Chevrolet Impala or Chevrolet Caprice.
Who makes the Parisienne?
PontiacGeneral Motors
Pontiac Parisienne/Manufacturers
What cars did Pontiac make in 1966?
First, and most important, is the fact that by 1966, most all of the muscle car lovers, like you and me, were enjoying the new mid-size muscle cars ala Pontiac GTO, Chevy SS396, Fairlane GT, Comet Cyclone, Olds 442,and Buick GS to name a few.
How long is a 1966 Pontiac Parisienne?
Pontiac Parisienne
bodywork | ||
---|---|---|
Track/tread (rear) | 1588 mm | 62.5 inches |
Length | 5448 mm | 214.5 inches |
Width | 2019 mm | 79.5 inches |
Height | 1397 mm | 55 inches |
What was the last year of the Pontiac Catalina?
1981
The Catalina was discontinued after the 1981 model year as Pontiac sought to abandon the full-sized car market as part of GM’s continued downsizing program. When production of the Catalina nameplate ended in 1981, over 3.8 million Catalinas had been sold since 1959.
Why was Pontiac discontinued?
The decision to eliminate Pontiac was made primarily due to the increasing threat of a bankruptcy filing if the June 1 deadline could not be met. On April 27, 2009, GM announced that Pontiac would be dropped and that all of its remaining models would be phased out by the end of 2010.
Are there any 1967 Pontiac 2 + 2 convertibles left?
The owner of this 1967 Pontiac 2+2 Convertible claims that it is 1-of-10 cars left in existence, and various reliable sources on the internet seem to confirm this fact. That makes this a very rare car, and it looks like it would also be a great prospect for a restoration project.
What kind of engine did a 1969 Pontiac 2 + 2 have?
The Canadian 64 and 65 versions came with a 6 cylinder, 283 or 409 Chevy engine. The 66 and 67 versions came with a 6 cylinder, 283 or 427 Chevy engine. The 68 and 69 versions came with 307 or 427 engines and finally, the 1970 version came with a 350 or 454 Chevy engine. These were supposedly built on Chevrolet frames.
Is the Pontiac 2 + 2 a hardtop or convertible?
The 2+2 was an option off the Parisienne model. They were made in 2 door hardtops and convertibles only. The quarter panels on the 69 and 70 models were totally different from the US standard Catalina. Image driving this to the POCI Convention with the top down! This shot was taken before the front valance was re-installed but what a car!
Where can I buy a 1969 Pontiac LeMans?
Gateway Classic Cars of Orlando is proud to present this 1969 Pontiac Tempest Lemans Convertible. It is going to be hard to beat this classic time capsule! Powering this 69 Lemans convertible for s… More Info › Gateway Classic Cars of Atlanta is proud to offer this sharp 1969 Pontiac GTO.