What if pilot light goes out on gas fireplace?

When a pilot light goes out on a gas fireplace, there is cause for concern if the gas flow hasn’t been interrupted. More commonly, a pilot light will go off because of a failure in the supply of gas. One thing to check is the gas valve on the fireplace and make sure it’s open.

How do I get my fireplace pilot light back on?

Hold the gas control button down while you hold the end of a lighted match or lighter at the end of the pilot tube. If you do this correctly, the pilot light should start as soon as the flame is close enough. Hold the pilot button down for about 20 seconds to give the thermocouple time to heat up, then release it.

What happens when pilot light goes out?

Can a Pilot Light Outage Be Dangerous? The worry here is that when a pilot goes out, the gas valve that supplies the fuel for the pilot flame could still be pumping gas. This can mean a buildup of gas, and when the pilot is relit or relights itself it could result in a very serious explosion.

Why does my fireplace pilot light go out?

The pilot light may accidentally go out from a gush of chimney air when the fireplace is vented through a chimney or the pilot may be turned off to conserve gas during the warmer months of non-use.

What to do if your pilot light goes out?

If the pilot light goes out, you can relight it after the gas is shut off using a match or the unit’s electronic ignitor if it has one, following the proper safety precautions. If your gas is shut off, turn the gas shutoff valves on all gas appliances to the “off” position until the gas service is restored.

Why you should turn off your gas fireplace pilot light?

Pilot OFF: No gas is being wasted so you are conserving energy and saving money! No heat is being generated by the pilot so the glass door on your fireplace will not be warm to the touch. With the pilot off, there are still trace amounts of gas molecules in the burner and pilot tubes of your fireplace.

What if your wall heater pilot light keeps going out?

5 Reasons Why Your Pilot Light Keeps Going Out Faulty Thermocouple. If your pilot light won’t stay lit, the thermocouple is very likely the culprit. Pilot Orifice is Dirty. If you can manage to get the pilot light lit for just a moment, inspect the flame. Bad Gas Regulator. Fluctuating Natural Gas Availability Based on Demand. Improper Air Flow, or a Strong Draft, Blows the Pilot Out.