What causes an electric hot water heater to stop working?

If an electric water heater is not producing hot water, it could be a simple problem like a blown fuse or tripped circuit breaker. Additionally, some electric water heaters have a circuit-style safety switch located near or on the thermostat. For gas water heaters, it could be as straightforward as being out of gas.

Can an electric water heater be repaired?

Heating elements on electric water heaters sometimes fail long before the water heater, but replacing them in a hot water heater is an easy DIY repair.

How do you fix a hot water heater that won’t get hot?

A water heater that produces no hot water may not be getting power, may have a tripped limit switch, or may have one or more failed heating elements. First, check the water heater’s circuit breaker in the service panel to make sure it hasn’t tripped. If the breaker has tripped, switch it off, then switch it back on.

How long do electric water heaters last?

10-15 years
While today’s water heaters are better designed than older models, they still require regular maintenance in order to prolong their lives. With regular inspection, draining, and flushing, you can expect a gas water heater to last anywhere from 8-12 years and an electric water heater to last anywhere from 10-15 years.

When should you use the reset button on a hot water heater?

Your water heater reset button is a safety device that shuts off power to your water heater when the water temperature inside it exceeds 180 degrees Fahrenheit. Side note: the reset button is also sometimes referred to as the ECO (emergency cut off) switch or “high limit safety thermostat switch”.

What trips the reset button on a hot water heater?

The reset button: a red button located on the water heater itself (just above the thermostat) that trips when the water temperature exceeds 180 F. The reset button is sometimes referred to as the “ECO” (emergency cut off) or “high limit switch”.

How do you repair an electric water heater?

Repairing a Heater Check electrical panel to be sure that circuit breaker is in the “On” position (not in tripped or off) or fuses (if used) are installed securely and not “blown”. Reset circuit breaker to “On” or replace any blown fuse(s) and wait 30 – 60 minutes for the water to warm. Shut off the power.

Why is my hot water not working?

Faulty Thermostat. The upper thermostat on an electric water heater actually controls both the upper and lower heating elements. This causes the dreaded hot water not working situation. The lower thermostat controls only the lower heating element so if it fails (but the upper thermostat works), the result is hot water not getting hot enough.

How do you troubleshoot a water heater?

Troubleshoot water heaters giving warm water or small amounts of hot water. Check the temperature setting. Adjust the setting with a slotted screwdriver if necessary. Set the temperature between 110 and 125 degrees F. Check the cold intake tube and fastener ring.

When to replace a water heater?

You should consider REPLACING your water heater if: The unit is more than ten years old It has not been properly maintained It is showing signs of wear listed above