What causes a washing machine to spin out of balance?
What causes a washing machine to spin out of balance?
A front load washer is much heavier and larger than its top load counterpart. An out-of-balance condition can result from an unlevel machine, or a worn out tub bearing that allows radial play in the wash basket shaft which causes the entire tub and basket assembly to spin wildly out of control.
Why does my washing machine shake violently when spinning?
Your washing machine needs to stand level and balanced on its feet to function properly. An unbalanced appliance will vibrate and shake during operation. Try rocking the appliance from side to side or back and forth. If it’s rocking a lot, your flooring or appliance’s feet may be uneven.
Can you rebalance a washing machine?
Leveling a Washing Machine By placing a level on top of the machine, you can adjust the feet of the washer, not the actual floor, to make the machine level. This means that even if the floor itself is not level, you can compensate by adjusting the machine feet to be just right.
What could cause Cabrio washer to stop during Spin Cycle?
The nut that holds the drive pulley in place can become loose over time. When this occurs it can cause your Whirlpool Cabrio washer to stop spinning. You’ll have to locate the drive pulley and tighten the nut.
Why does my washer make loud knocking noise when in Spin Cycle?
A washer making a loud noise during spin cycle can also be caused by a faulty drive pulley. The pulley is what the belt (if applicable to your washer) rides on to spin your washers tub. The pulley can be made of plastic or metal. It could be simply worn out or just loose.
What causes the washing machine to not spin?
How to Repair a Washing Machine That is Not Spinning Fast Enough Check to see if the washer is overloaded. Modern washing machines have automatic shut-off devices for out-of-balance loads. Make sure the water is draining properly. If the water does not drain out, then it could cause the washing machine not to spin. Check to see if any belts have came off or are loose.
Why is the washing machine getting out of balance?
A machine that is not level will rock during the spin cycle and cause the machine to be off balance. All four legs should be in firm contact with a solid floor. A carpeted surface can throw this balance off. If your washer is located on a pedestal, the problem can be amplified.