What are the dimensions of T1-11?

48 inches x 96 inches
You can find T1-11 siding in sheets that are 48 inches x 96 inches or 48 inches x 120 inches. It comes in thicknesses of 3/8 of an inch, 5/8 of an inch and 3/4 of an inch.

Is T1-11 siding structural?

T1-11 siding is a typical plywood siding. The advantage to T1-11 is that you get your code structural strength (if code rated) and siding at the same time rather than using OSB or Ply CDX for structural and then siding over it for protection.

Is T1-11 siding cheap?

T1-11 siding is strong, highly functional and durable – it has a long life as compared to other sidings. However, for many in the building community, it is thought of as cheap and is considered a low-quality material.

What type of siding is T1-11?

T1-11 siding is wood or wood-based siding for homes. It’s made from either plywood or oriented stand board. You can paint or stain it to create a beautiful look for your home. It’s cheaper than most siding types.

What does T1-11 stand for?

Plywood and other compressed wood siding products are an inexpensive way to sheath outdoor buildings, sheds and other projects. T1-11, sometimes noted as T111 or T1, is an example of one of many such wood siding products. The ‘T’ in T1 stands for “textured,” which references the grooves or channels cut into the siding.

How long does T1-11 siding last?

T1-11 siding is a very durable siding material and can last for more than 20 years if it is properly installed, regularly maintained, sealed with quality paint or stain, and protected from water and mold damage.

What thickness T1-11 should I use?

T1-11 plywood sheets are available in 48-by-96-inch or 48-by-120-inch sheets. Sheet thickness is either 3/8, 5/8 or 3/4 inch. T1-11 is available with a rough-surfaced, textured finish or a smooth, sanded finish. The choice between the two is determined by aesthetics.

Why is it called T1-11 siding?

Is T1-11 tongue and groove?

All types of T1-11 siding have outer edges with 3/8-inch wide lips on the long sides, designed to overlap the piece that was installed previously. This is not a tongue-in-groove joint, but rather a lap joint. Panels are always installed with the grooves running vertically.

How often does T1-11 siding need to be painted?

T1-11 siding should be inspected annually (quarterly is even better) so that holes, water or moisture intrusion can be identified and corrected immediately. Hands down, the best way to guard this siding against the elements (and various bugs and critters) and protect and lengthen its lifespan is to paint it.

How do you seal the bottom of T1-11 siding?

Trim the siding with one-by-four-inch wooden trim, covering the gaps around windows and doors, under the soffit and on the corners of the house. Nail the trim with two-inch galvanized nails, then caulk around it with acrylic latex caulk.

What is T1-11 siding and why does it fail?

T1-11 siding is a functional siding with great aesthetics so what is the issue with this siding. Water damage is the primary reason it fails. The plywood siding has less of an issue with water damage than the OSB has. To prevent water damage with any siding it requires proper installation, sealing, and maintenance.

What is T – 11 siding?

What is T1-11 Siding? T1-11 is a type of wood paneling that first appeared in the 1960s. The product continued to get used regularly on homes over the next couple of decades before other materials like steel, aluminum, vinyl, and composite became more popular with builders.

What is T111 plywood?

One type of plywood is t111 which is made when wood supplies and some other materials are mixed together. Examples of T111 plywood siding is T111 wood siding or T111 cedar siding. These boards resemble clapboards but still they are not entirely same. They are more natural looking than aluminum or steel etc.