Is 9mm major or minor power factor?

The 9 mm is the most popular Minor caliber and factory loads in 115-and 124-grains all make a PF in the 138 to 141 range. The standard factory load for the 147-grain load is in the 990-1000 FPS range and makes about a 147 PF.

What is 9mm minor and major?

9mm Minor and 9 Major Power Factors Values ranging from 125 to 164.9 rate as Minor Power Factor, while 165 and above score as Major. A 124-grain bullet running 1,010 FPS hits 125.2 on the Power Factor scale, which is Minor.

What is PF in ballistics?

Power factor is a measure of the momentum of the bullet (scaled product of the bullet’s mass and velocity), which to some degree reflect the recoil impulse from the firearm onto the shooter (see section on limitations).

What is power factor IPSC?

Power Factor Major and Minor factor are the two power factors floors recognized in IPSC. The power factor of a firearm is calculated using the formula of Bullet Weight (grains) times Velocity (feet/second) divided by 1000.

Can Glocks shoot 9mm major?

Yes a 9X19 standard 9mm case. They do load the bullets further out to get more powder in the case. I did the calculations and here is what would be needed to make major power factor: A 115gr bullet would need to be moving at 1,450fps.

Is 9mm major?

Race Guns. The 9mm only qualifies for Major scoring in Open Division, a division where compensators and optical sights (e.g. red dot sights) are allowed. In all other divisions, the 9mm is scored Minor. Open Division guns are often referred to as race guns.

What 9mm does John Wick use?

John Wick uses a number of weapons throughout the movie, but his primary pistols, the ones he has buried in concrete beneath his basement, are Heckler & Koch P30Ls. These 9mm pistols don’t seem to have any trouble dispatching Wick’s opponents, despite the smaller size of the round when compared to its .

How do you calculate power factor?

The power factor of an AC circuit is defined as the ratio of the real power (W) consumed by a circuit to the apparent power (VA) consumed by the same circuit. This therefore gives us: Power Factor = Real Power/Apparent Power, or p.f. = W/VA.

How do you calculate the power factor?

How is hit factor calculated?

The hit factor is calculated by summing the points (target scores minus penalties) and dividing by the time used. For example, if a stage has 12 paper targets, requires two scoring hits per paper target, and since an A-hit gives 5 points, the stage will have 12 × 2 × 5 = 120 points available.

What guns will shoot 9mm major?

You find 9mm Major mostly (almost exclusively) in USPSA and IPSC Open division guns.

What’s the difference between minor and major power factor?

A common distinction is between “Minor” and “Major” power factor, and it determines the score value of peripheral hits. For example, in some divisions of USPSA competition, in order for pistol ammunition to qualify for Major, it must be at least .40 caliber and achieve a 165 power factor.

What’s the minor power factor for a 9mm?

To qualify for Minor power factor in USPSA competition, loads must achieve at least a 125 power factor. This is easy for the 9mm Luger and most factory loads will do this. For example, a 115 grain bullet at 1,175 fps produces a 135 power factor (115 times 1,175 = 135,125 divided by 1,000 = 135).

What should the recoil of a minor power factor be?

Minor power factor ammunition must achieve a value of at least 125. Many of these sports are timed events, and a light recoiling load can allow faster follow-up shots, giving the shooter a speed advantage. As we know, every fraction of a second can determine who wins the match.

What are the power factors in the USPSA?

Most United States Practical Shooting Association Divisions have both a Major and Minor Power Factor. Hits outside of the “A” zone are worth more with major loads, and lower with minor loads. Check out the six USPSA divisions and their power factors below (power factor doesn’t matter for pistol caliber carbine shooters):