How to Reset Onkyo TX NR414?

To reset the AV receiver to its factory defaults, turn it on and, while holding down CBL/SAT, press 8 ON/STANDBY. “Clear” will appear on the AV receiver’ s display and the AV receiver will enter standby mode. Note that resetting the AV receiver will delete your radio presets and custom settings.

What is standby hybrid?

Hello. The Hybrid Standby light indicates that there is a feature that is being utilized by the receiver while in “Standby Mode”. This could be many features. If you are using “HDMI Through”, “Network Standby”, “HDMI CEC”, ect, the Hybrid Standby Light will be on.

What is standby mode on a receiver?

Setting standby mode (Auto Standby) You can set the receiver to switch to standby mode automatically when you do not operate the receiver or when no signals are input to the receiver. When you set [On], the receiver switches to standby mode after approximately 20 minutes.

How do I fix my Onkyo receiver protect mode?

How to Reset Onkyo Protect Mode

1. Unplug the receiver’s power cord from the wall and leave unplugged for at least one hour.
2. Reconnect the power cord after at least one hour has passed.
3. Turn the receiver on and turn the volume to the maximum setting.
4. Turn the volume back to the minimum setting and turn off the receiver.

Why does my receiver keep shutting off?

If a receiver is not getting enough current, it will turn itself off. If your receiver shares a wall outlet with another high-current appliance (e.g. refrigerator, air conditioner, heater, or vacuum) the receiver may shut itself off when there is insufficient current.

How do you reset Onkyo protect mode?

How do I reset my Onkyo Remote?

To reset all the remote controller settings: While holding down RECEIVER, press and hold Q for 3 or more seconds until the remote indicator stays lit. Within 30 seconds, press RECEIVER again. Resetting is complete when the remote indicator flashes twice.

Which is better Onkyo txnr414 or tx-nr414?

With nearly 30% more power than the model below, the Onkyo TX-NR414 is a powerful performer. It’s not just about power, either, it’s about quality, too. The TX-NR414 also comes with Onkyo’s WRAT (Wide Range Amplifier Technology). WRAT gives a more dynamic sound with a punchier bass response. Added to this is a discrete output stage.

How to factory reset Onkyo tx-nr414 5.1hdmi home theater surround receiver?

How to Factory Reset Onkyo TX-NR414 5.1HDMI Home Theater Surround Receiver. Press and hold CBL/SAT button, then press and hold the On/Off button till you see “clear” on the display and the receiver will be factory reset. Category. Music. Show less.

Is there a warranty on an Onkyo receiver?

Unfortunately my unit doesn’t qualify for that warranty extension and Onkyo warranties are only for 2 years I believe. I checked the fuse on the power supply and it looks intact to me. There were also a couple of fuses on whatever board is next to the power supply and they looked identically intact: imgur.com/a/oaA4e

Why is my Onkyo ht-r391 receiver not power on?

I have an Onkyo HT-R391 receiver (part of a HT-S3500 HTIB system) which will not power on at all. I turned it off last night after using for several hours and it wouldn’t not turn back on this evening.