How often should I service my Ninja 300?

Something like first service after 1000 km or (not sure how many) months, whichever comes first, then every 5000 km or six months, whichever comes first.

How do you maintain a Kawasaki Ninja 300?

To maintain the bike properly all you need is:

1. Oil change every 5000km or 3 months.
2. Engine service for every 7500km, or 10.000km.
3. Oil filter change after changing the oil twice (which is around 10.000km).
4. Air filter change after 2 years.
5. Chain slack.
6. Throttle and clutch freeplay.
7. Brake fluid change after 2 years.

When should you change the oil on a Kawasaki Ninja 300?

Registered. After the the change at 600 miles / 1000 km, the second change is at 7600 miles / 12000 km (using regular oil). Assuming you wanted to follow the manual, then you would need to ride ~5800 more miles.

How long does Kawasaki 300 last?

Registered. With proper maintenance, modern day motorcycles can last well over 100K miles.

When did the Kawasaki Ninja 300 come out?

This is the maintenance schedule with associated service intervals for the Kawasaki Ninja 300, sold between 2013 and 2017, replacing (finally) the long-standing Ninja 250. The Kawasaki Ninja 300 is a “sport” motorcycle with a pretty upright posture. It might seem like a small upgrade to the 250, but the 300 is capable of power wheelies if you try!

How to do periodic maintenance on Kawasaki Ninja 300?

Page 44 2-18 PERIODIC MAINTENANCE Periodic Maintenance Procedures • Connect a vacuum gauge (special tool) and hoses [A] to the fittings on the throttle body. Special Tool – Vacuum Gauge: 57001-1369 • Connect a highly accurate tachometer to one of the stick coil primary leads.

How much does it cost to service a Kawasaki Ninja?

There are no free service for any of the kawasaki bikes (sad)Each service will cost you Rs. 5200 average. Each 4th service will cost you around Rs. 12000 for a 300 cc bike.And this will repeat in future until you stop riding the bike.

How big is the oil pump on a Kawasaki Ninja 300?

Page 33 PERIODIC MAINTENANCE 2-7 Torque and Locking Agent Torque Fastener Remarks N·m kgf·m ft·lb Oil Pump Mounting Bolts 87 in·lb Oil Pressure Switch Terminal Bolt 0.15 13 in·lb Oil Pressure Switch Oil Pipe Banjo Bolt (Inside) 106 in·lb Oil Pressure Relief Valve Oil Pan Bolts 87 in·lb Engine Oil Drain Bolt…