How much is a 1911 trigger job?

Probably $60 to$100.

What makes a good 1911 trigger?

For the best 1911 trigger, look for one crafted from aircraft-grade aluminum. This gives excellent durability and provides a smooth, clean finish that’s resistant to scratching as well as damage from wear and tear. The lightweight material will also add the most minimal weight possible to your 1911.

What is the best 1911 for target shooting?

These are competition-ready 1911s you can shoot for decades.

• Colt Combat Elite.
• Dan Wesson Elite Series Chaos.
• MAC 3011 SSD Tactical.
• Kimber Team Match II.
• Remington 1911 R1 Enhanced.
• Rock River Arms 1911-A1 Limited Match.
• Sig Sauer 1911 Traditional Match Elite.
• Springfield Armory Range Officer.

How does a 1911 trigger work?

Part of how a 1911 trigger works is that rearward motion of the trigger causes the lower sear lever to tilt forward toward the barrel. The trigger pull has no resistance until these levers begin to engage the firing pin block, which creates the stacking effect.

What is the sear on a 1911?

In a firearm, the sear is the part of the trigger mechanism that holds the hammer, striker, or bolt back until the correct amount of pressure has been applied to the trigger, at which point the hammer, striker, or bolt is released to discharge the weapon.

What is a trigger job on a gun?

Trigger jobs are also called action jobs. This type of work causes the action of the gun to change, and you will feel that change in the trigger when you fire the gun. Common trigger jobs include action polishing, spring adjustments and refining or reconfiguring the engagement surfaces.

Which 1911 upgrade is best?

The Top 10 1911 Gun Mods

• 1911 Barrel. One of the most common 1911 upgrades is the barrel.
• 1911 Sights. The next item that’s one of the first things to get the upgrade treatment are 1911 sights.
• Grips.
• Grip Safety.
• 1911 Hammer Upgrades.
• Trigger Upgrades And Trigger Group Upgrades.
• Full Length Guide Rod.
• Spring Kit.

Can you mount a red dot on a 1911?

There simply is nothing that can beat a red dot on a range toy. I agree they’re cumbersome. They’re certainly not going to be a carry gun. But then a full size 1911 isn’t a likely carry gun to start with at a hefty 40 ounces empty.

Is a Kimber 1911 worth the money?

Exactly and it’s a real value IMO. The kimber custom II is one of the best values in the market. I personally wouldn’t buy one of the really expensive kimber models because I would rather save a bit more and buy a wilson, etc. However, the base custom models are fantastic and worth every penny.

How many pounds is a 1911 trigger?

When it came to the ideal carry-weight trigger pull on a 1911 in the hands of someone competent, Jeff Cooper himself said, “Three pounds, crisp, is the word.”

What does the disconnector do in a 1911?

Description / 1911 Disconnector So how does the 1911 disconnector work? Located in the grip of the pistol adjacent the sear, the disconnector acts on the sear in a manner that prevents the hammer from falling in case of a trigger pull while the slide is out of battery.

Do you need a drop in trigger job for a 1911?

Ready-to-drop-in parts put an ultra-smooth, clean breaking, professional quality trigger job in your 1911 Auto in only minutes. Fully prepared hammer and pre-ground, pre-polished sear, plus springs and fully-machined disconnector, will install into most models of 1911 Autos with little or no fitting required.

What’s the best angle for a 1911 trigger?

1911 Sear 45 Degree Hammer Hook Angle. You want these at a 90 degree angle. The best way is to use the straight edge of your stones. Do a couple swipes on the Arkansas stone and finish it off on the ceramic.

What can I do with my 1911 rifle?

Your 1911 can also benefit from a trigger job with a properly shaped sear nose. Beveling your existing mag well or adding an aftermarket part will dramatically speed up your reloads. Installing an ambidextrous thumb safety allows you to run the gun with either hand. A new grip safety can make for a better fit.

What kind of trigger pull does commander use?

Commander Match – Carry Defense Style! A professional 4 lb. trigger pull. SPECS: Kit includes hammer, sear, sear spring, mainspring (hammer spring) and disconnector. Pro Match – Stainless Steel, Rc 50.

https://www.youtube.com/watch?v=86YNQBbbnac