How much HP does a 428 engine have?
How much HP does a 428 engine have?
The factory power rating seemed to be a typo. Without a wink or a nod, Ford claimed the new CJ made 335 hp at 5,600 rpm and 445 lb-ft of torque at 3,400 rpm….Testing 4-2-8… How Much Horsepower Does the Ford 428 Cobra Jet Really Make?
| RPM | Torque (lb-ft) | HP |
|---|---|---|
| 5,000 | 376.5 | 358.9 |
What is the difference between 428 CJ and 428 SCJ?
First you have to start with the 428 v.s. the 428 CJ. The CJ block differs from the plain 428 due to the additional webs cast into the main bearing saddles. The SCJ block is the same as a CJ.
What cars had a 428?
The 428 CJ was offered in Mustang fastbacks and coupes (and in Ford Torino and Mercury Cougar and Cyclone models) with a four-speed manual or three-speed automatic. All 1968 Ford Mustang 428 Cobra Jets had beefed-up front shock towers and Polyglas F70X14 tires. Four-speed cars got staggered rear shocks.
What size motor is a 428?
Description
| Displacement | Type | Stroke+/-0.004 |
|---|---|---|
| 406 cu in (6.7 L) | FE | 3.784 in (96.1 mm) |
| 410 cu in (6.7 L) | 3.984 in (101.2 mm) | |
| 427 cu in (7.0 L) | 3.784 in (96.1 mm) | |
| 428 cu in (7.0 L) | 3.984 in (101.2 mm) |
What are the dimensions of a Ford 428 engine?
The 428 should be between 2.022 and 2.037 inches, with the CJ engine measuring 2.080 to 2.097 inches. The exhaust valve diameter should be 1.551 to 1.566 inches, with the CJ engine measuring between 1.652 and 1.660 inches. The valve stem diameter is 0.371 inches and the valve lifters are hydraulic.
How big is a 428 Cobra Jet engine?
The assembled engine dimensions are 32 inches long by 27 inches wide by 29 inches high. Because of different piston weights, there are actually four different 428 crankshafts, according to The Ford V-8 Engine Workshop: 428 Cobra Jet.
How did the project 428 Pony jet get its name?
“And Windsors are ideal for doing stroker motors.” With that mantra as inspiration, project 428 Pony Jet was conceived, symbolizing the engine’s displacement and a pun reference to the milestone 428 Cobra Jet fused with the engine’s eventual installation in the original ponycar. How much power?
How big is the exhaust valve on a 428?
Measure the intake valve diameter. The 428 should be between 2.022 and 2.037 inches, with the CJ engine measuring 2.080 to 2.097 inches. The exhaust valve diameter should be 1.551 to 1.566 inches, with the CJ engine measuring between 1.652 and 1.660 inches. The valve stem diameter is 0.371 inches and the valve lifters are hydraulic.