How much does it cost to replace brake pads Ford Focus?

Ford Focus brake pads replacement, which includes parts and labor, can cost anywhere between $150 and $300 per axle depending on the type of brake pads desired and the extent of the damage your previously worn down pads have caused to the other components of your vehicle such as the rotors.

What brake pads does Ford use?

Motorcraft® Brake Pads are made of the best materials and specifications for your Ford vehicle.

How long do Ford Focus brake pads last?

between 30,000 and 70,000 miles
Ford Focus brake pads usually last between 30,000 and 70,000 miles depending on your driving habits. If you commute in heavy traffic and use your brakes often, you’ll need to get an inspection more frequently.

Is it OK to just replace brake pads?

A: Unless the rotors are worn beyond the mandatory discard thickness, we prefer to replace the pads only. Not only does this obviously save money, but time. New pads must be burnished into new rotors before the best braking performance is achieved.

How much should it cost to replace brake pads and rotors?

How much should it be to replace the brake pads and rotors? Expect a brake job of replacing brake pads and rotors to cost $250-$400 per axle on average.

Does a Ford Focus have rotors?

There are a lot different kinds of rotors available for your Ford Focus, comprising drilled rotors and slotted brake rotors. What’s first-rate for you and your car will alter heavily depending on innumerable factors.

Are ceramic brake pads better than semi metallic?

Ceramic brake pads typically last longer than semi-metallic brake pads, and through their lifespan, provide better noise control and less wear-and-tear to rotors, without sacrificing braking performance.

Are Motorcraft brake pads ceramic?

Motorcraft® BRF1467 – Standard Premium™ Ceramic Front Disc Brake Pads.

How do I know if my brake pads are worn out?

WHAT HAPPENS WHEN BRAKE PADS/SHOES WEAR OUT?

1. SQUEALING OR SCREECHING NOISES. If a vehicle’s brake pads have wear indicators, a driver may notice a squealing, screeching or whining noise when the brakes are engaged.
2. LESS THAN A QUARTER INCH OF BRAKE PAD.
3. DEEP METALLIC GRINDING AND GROWLING.
4. INDICATOR LIGHTS.

What happens if you wait too long to change brake pads?

When the brake pads deteriorate to the point where the calipers are grinding against the rotor, the calipers can be destroyed right along with the rotor. It’s not worth risking your safety by waiting to replace your brake pads, and you may end up doing more damage and paying more due to your delay.

Where do you put the brakes on a focus ST225?

You are best off starting at the front of the car. Make sure you first open the bonnet and loosen the brake master cylinder cap. Next loosen the wheel nuts (do not remove them until you have the car jacked up).

How do you put brakes on a focus?

You are best off starting at the front of the car. Make sure you first open the bonnet and loosen the brake master cylinder cap. Next loosen the wheel nuts (do not remove them until you have the car jacked up). Now jack the car up, and it is always best to secure the car with an Axle stand (just to be on the safe side).

Where is the hex bolt on a focus ST225?

If you look behind the calliper you will see a plastic cap that goes over a rubber bung. There is one at the top and the bottom of the calliper. Once you remove the plastic cap, you will find a T45 hex bolt inside which needs to be removed.

Are there any brake parts that are made by Ford?

Count on Ford brake parts to provide the quality, reliability and durability you expect from Ford Motor Company. These products are Ford-recommended for Ford and Lincoln vehicles and are manufactured to strict Ford specifications.