How much area does a recessed light cover?

Measure your room to see how many fixtures you will need. A common rule of thumb is that you use one recessed light for every 4 to 6 square feet of ceiling space. Doing so provides even, overall illumination.

How do I calculate recessed lighting?

Total wattage divided by 60 watts (or whichever wattage you need) = total amount of recessed can lights. Example: 240 square foot room x 1.5 = 360 divided by 60 (the bulb wattage I’d like to use) = 6 recessed lights needed.

How many can lights in a 20×20 room?

If you have a center light fixture, you should be able to use 4 inch line voltage cans or low voltage for supplemental lighting. I would go with at least 8 three inch cans for a 20 foot room.

How many can lights for a 12×12 room?

The typical rule-of-thumb is 24″ from each wall, and then 3-5 feet between cans. So in a 12′ room you’d probably want two rows of lights. Considering it is a bedroom and you don’t need it as bright as a kitchen, you can probably get away with 2 rows of 4 lights for a total of 8.

How many recessed lights is too many?

Still, recessed downlights don’t illuminate walls so relying on them as the only source of light in any room will leave some areas poorly lit. The fix: To avoid having your kitchen ceiling look like an airport runway, the general rule to follow is: use one recessed light for every 4-6 square feet of ceiling space.

How many recessed lights can you put on one switch?

The main limitation on the number of recessed lights that a single switch can control is the rating of the circuit breaker controlling the circuit. Each incandescent or halogen 60-watt bulb draws around 1/2 amp, and therefore, standard lighting with a 15amp breaker can manage 30 lights.

Can you have too many recessed lights?

In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill. Create a lighting plan. An expert can help you plan for the right number of lights based on the size of the space and the technical aspects of the light fixtures in question.

What is the best spacing for recessed lighting?

A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.

Are recessed lights outdated?

Recessed lighting will never go out of style. However, the finishes and sizes will vary and change as time goes by. There are too many advantages of having the lighting recessed for them to eventually go out of style or phase out.

What is the most common size for recessed lighting?

Recessed lights are categorized by their size. The most common residential sizes are 4-inch, 5-inch and 6-inch.

Do recessed lights increase home value?

Recessed lighting can absolutely add home value of you take the time to place them correctly and use the right light temperature for the room. There are also ways to make recessed lighting more energy efficient which is not a bad additional benefit.

Can I daisy chain recessed lights?

You can not daisy chain multiple lights together. If you are using aspectLED Ultra-Thin extension cables, always purchase the appropriate length cable and never connect multiple extension cables together.

Is there a calculator for recessed lighting?

However, it should give you an idea of how to apply the formula for the placement and spacing of recessed lighting. If you’re unsure where to begin, you can also use our general lighting calculator to help you determine how many recessed lights the room needs.

Why do you need a recessed lighting layout?

The intensity of the output light also depends on the type of the bulb, which produces the light. We need to get a proper recessed lighting layout that creates a uniform light pattern over the area you need to light, to get that you need to properly space the recessed lighting.

What’s the best spacing for recessed light fixtures?

Step 1 : The rule for installing wall wash recessed fixtures is approx. 1.5′ to 3′ away from the wall. Step 2: Fixed lights can be placed closer to the wall. Step 3: Place adjustable lights farther away from the wall. The optimal aiming angle to minimize glare is 30-degrees from the ceiling, that way we avoid glare.

What are the different types of recessed lights?

There are generally 2 types of recessed lights – Spot lights and Flood lights. Spot lights have a narrow beam of light casting light to a focussed area, usually these are used to highlighting art or important design elements in the room. They cast beams 45 degrees or less.