How long do hot springs Tri X filters last?

5 to 7 years
The tri-X filter is made to last at least 5 to 7 years! This filter works in any spa that takes the #71825 or C-6430 Hot Spring Filter.

Are hot tub filters interchangeable?

You can usually use another similar sized hot tub filter to fit. Filter manufacturer sizes may vary slightly. So always allow for a variance of +/- 5mm. If it has a threaded bottom, this needs to be the same size.

What is the best filter cycle for a hot tub?

Most residential spa owners do not need to run their hot tub pumps all the time. Unless the spa is used multiple times per day, a filtration cycle of 2-8 hours, twice a day, should be enough to keep most hot tubs sanitary.

Can I clean my hot tub filter with vinegar?

Vinegar is a weak acid that dissolves scale, and it’s safe enough to drink, so cleaning hot tub filters with vinegar is one of the methods recommended by spa maintenance professionals.

How often do you replace spa filters?

every 12-24 months
To keep your spa sparkling and safe to use, replace your spa filter cartridges every 12-24 months.

Why does my hot tub have two filters?

Some hot tubs don’t include filters at every intake location; instead, they rely on just one or two filters to handle a disproportionate volume of water. The intakes without filters have suction fittings that pull water into the pump. That unfiltered water is then pushed back out through the jets.

How do I know what filter my hot tub uses?

Check both ends of your filter, and if you have a number on it that looks similar to this, that’s your filter model number. Just search for that number on our website and you’ll find compatible filters. If there’s nothing printed on your filter, you will need to pull out a measuring tape or a ruler.

Can I clean my hot tub filter in the washing machine?

As with a dishwasher, you could damage your filter by placing it in the washing machine, the banging against the metal drum of your washing machine could cause the plastic to crack. In conclusion we recommend that you DO NOT PLACE YOUR HOT TUB FILTER IN THE WASHING MACHINE.

How often should you run a spa filter?

Three Hours Twice a Day Is Recommended Most spa filter cycles are pre-set to run twice each day for four hours each time, but allowing the spa to cycle less often can save energy. Washington State University’s energy program recommends running the filter twice a day for three hours.

Should you leave hot tub filter on all the time?

Keeping your spa’s filters clean will not only prolong their life but also make your pump more efficient. The pump will therefore have to work twice as hard to filtrate the water, which may cause increased energy usage. Find out more about hot tub filter care.

How much vinegar do I put in my hot tub filter?

Pour in at least 1/2 gallon of vinegar. Ideally, you want a 50/50 concentration of vinegar and water, so you may have to pour in more than a half gallon of vinegar. Let the filter soak for a minimum of 3 hours. It’s better if you can leave it overnight, particularly if it has been a while since you last cleaned it.

Can a Tri-X Filter be used on a hot tub?

The patented Tri-X filtration system is standard on many Hot Spring spa models and may be used on any Hot Spring hot tub. The Tri-X filters have twice the cleaning area of other cartridges its size. To avoid dirty water in your hot tub, choose the best filtration system and do regular hot tub maintenance that includes cleaning your filter.

How long does a hot spring Tri X Filter last?

Tri-X filters have P/N 0969601 stamped on the top of it. The ceramic design allows it to filter twice as well as a standard cloth filter A Tri-X can last up to 5 years if properly maintained.

How often should I Clean my Tri X Filter?

A Tri-X Filter can be cleaned using either a garden hose or dish washer. The filter should be cleaned once a month with filter cleaner. Complete Cleaning Instructions can be found here. Great price for Tri-X filters.

What’s the difference between Tri X and tmax?

TMAX has a much more linear tonal scale than Tri-X. Tri-X has more highlight and shadow compression. TMAX can develop a very high Dmax, which is useful if you need it (Alt Process printing), and a pain if you don’t want it. Again, precision and repeatability will reward you.