How do you write protect a floppy?

On one corner, there should be a sliding tab. If you hold the disk so that the edge that goes into the drive is at the bottom, this should be in the top left corner. If the movable part of the sliding tab is up, so that there’s a hole in that corner of the disk, the disk is write-protected.

How much memory can a 5.25-inch floppy disk hold?

Originally designed as a single-sided, low-density format with a storage capacity of 100 KB, the 5.25-inch floppy disk underwent many enhancements, including the introduction of a double-sided, high-density variant with a capacity of 1.2 MB.

How does write protect work on a floppy disk?

Earlier removable media such as a floppy diskette use write-protect to protect a disk from being erased or overwritten. The 5.25-inch floppy diskette had a hole in the upper corner of the diskette that could be covered with tape to enable write-protection.

Can a 5.25 ” floppy disk be writable on a PC?

Disks from microcomputers (Commodore, Atari) may be modulated in GCR, not MFM, so they won’t be readable/writable easily in PC 5.25″ drive. You can use special cables to connect Commodore drive to PC or use some programs to only read these disks, they may work. Many times you don’t have a sleeve to put your disk into.

Is there a way to write to a floppy disk?

With 3.25″ floppy diskettes, the tab would often be missing from the diskette. However, covering the hole with a piece of tape would allow you to write to the diskette.

What kind of computer was a floppy disk used for?

5.25″ floppy disks. 8 inch floppy disks were first popular floppy disks. They were used in nearly all aspects of computing in 1970s and early 80s. These floppy disks were used in computers, workstations, microcomputers, industrial analysers and machine driving computers, and even in some terminals.