How do you use a trans-brake?

Immediately press the trans-brake button but remember to keep your foot on the brake pedal. Wait for a split second in order to give the brake time to engage. As far as rpm is concerned, higher doesn’t necessarily mean better or faster.

Is a trans-brake hard on transmission?

With a trans-brake, not so much. One infinitesimally small instant in time, the engine is spinning the front of the transmission and the trans-brake has the transmission internals working at cross-purposed. This is intensely stressful for the transmission.

What does a shift kit do for a 4L60E?

The B&M 4L60E Shift Improver Kit mechanically recalibrates your transmission to produce firm positive shifts, this helps reduce clutch pack heat build-up and improves transmission durability. This kit does not change or modify shift point RPM in any range.

What is a trans-brake solenoid?

The Trans-Brake allows the engine to develop full power without that power being transmitted into the drive-train. This is achieved by using a trans-brake solenoid, which locks the transmission into both first and reverse gears simultaneously, locking the output of the transmission.

What is the point of a trans brake?

Unsourced material may be challenged and removed. In drag racing, a Transbrake is a mechanism that selectively places the transmission in A forward and reverse gear simultaneously. This allows the engine to create full power without transmitting that power through the driveline, allowing the car to stay in one place.

Why do drag cars bump?

For drag racers, there’s a thousand ways to do everything.” For drag racers, there’s a thousand ways to do everything. The Bump Box essentially delivers all of the power from the transmission to the tire, for a very brief amount of time, allowing it to move forward a specific distance into the stage beams.

What is the purpose of a trans brake?

A trans brake is an aftermarket electronic device that locks up an automatic transmission by engaging Drive and Reverse simultaneously. During a drag race, this allows the driver to rev up the engine at the starting line without worrying about the car creeping forward.

Can you daily drive with a transbrake?

Yeah, it should not effect anything in regards to daily driving. A torque converter, which I think you would see more benifit from if to pick from the two, you might see some changes with daily driving but should not be anything detrimental.

How much horsepower can a 4L60E handle?

So, to keep things cooler they run a deep pan with a filter extension. The heavy-gauge cast-aluminum pan allows for an additional two quarts of transmission fluid, which enhances cooling under extreme conditions. 22. See, that’s all it takes to build a 4L60E trans that’s rated to handle over 1,000 horsepower.

Can I put a 4L80E in place of a 4L60E?

Upgrading from the 4L60E to the 4L80E is akin to going from a Dana 44 axle to a Dana 60–you’ll add some weight, but also add durability. According to GM Powertrain information, the 4L60E has a maximum engine torque rating of 360 lb-ft and a maximum gearbox torque rating of 610 lb-ft.

Can you put a transbrake on a 700R4?

The GM 700R4 Transbrake Valve Body Kit Creates improved reaction times and quicker acceleration in drag racing applications and GM 700R4-equipped street/strip vehicles.

How does a racing trans brake work?

A transbrake is activated by a driver-controlled switch that connects to a solenoid mounted on the transmission. When engaged, the transbrake applies forward/low gear and reverse at the same time. Working against each other, the vehicle is unable to move, and is effectively locked in position on the starting line.

Is the 4L60E a manual or automatic transmission?

Automatic Transmission, Forward Shift Pattern, Automatic/Manual Valve Body, Chevy, 4L60E, RWD, Each Automatic Transmission, Forward Shift Pattern, Automatic Valve Body, Chevy, 4L60E, RWD, Each

Is there a core charge on a 4L65E transmission?

Transmission pressure and temperature gauge must be installed or warranty is void. No additional core charge, however $175 core credit is available with 700R4 cores and $200 credit on 4L65E and 4L85E cores.

How does a trans brake valve engine work?

They work like this: When the trans-brake is engaged, the vehicle can roll neither forward nor backward, and as you press on the accelerator, the engine can rev as high as the torque converter stall. Once the brake is released, power is immediately transferred to the rear tires, with less parts breakage than with a manual transmission.

Where can I buy a TCI trans brake kit?

Select your preferred location and we’ll note which parts are ready to be picked up TODAY. Sold individually. (7) Sold as a kit. (3) TCI trans-brake kits allow you to achieve maximum torque converter stall for quicker and more consistent reaction and 60 ft. times.