How do you pair Kitsound?

Start by holding the MFB (2) down for 4 seconds. You will see the Wireless LED indicator (7) flash blue and red alternatively, indicating that it has entered pairing mode 2. Activate the Bluetooth feature on your device and search for wireless devices (check your device’s manual if you’re unsure how to do this) 3.

How do I pair my boogie KS?

1. Press the MFB (1) to turn the speaker on. It will enter pairing mode, with the LED indicator (5) flashing blue quickly.
2. Turn your iOS, Android, or Windows device’s Bluetooth ON and search for new devices.
3. Select ‘KS Boogie’. If asked for a passcode, enter ‘0000’, and the device will pair.

How do I connect my KS Boom Bar?

The BoomBar+ has a removable rechargeable lithium battery. Make sure the BoomBar+ is switched off. Connect one end of the Micro USB charge cable to the Micro USB charge port (4) on the BoomBar+ and connect the other end to your PC or USB mains adaptor. The battery will start charging.

How to turn on pairing mode on kitsound?

1. With the BoomBar+ turned off, press and hold the MFB (1) for 3 seconds 2. The LED indicator (2) will quickly flash blue to indicate power on. Shortly after powering on the LED indicator (2) will flash red/blue, indicating pairing mode has been entered 3.

How do you play music on a kitsound speaker?

Follow the instructions in the ‘Pairing a wireless device’ section 2. Use the controls on your device to select content 3. Audio played through the connected wireless device will now be heard through the speaker 4. To play or pause the selected track, use the controls on your device or press the MFB (1) 5.

What are the specs of the kitsound Boombar?

Specifications Works with Bluetooth® V4.1 Wireless connectivity range up to 10 m S/N 85 dB Frequency response 20 Hz – 20 kHz Driver 2 x 40 mm Output RMS 6 W Aux-in 3.5 mm Play time up to 20 hours Charging time up to 3 hours Battery Li-ion, 1120 mAh Care for your BoomBar+ Please DON’T: • Get the BoomBar+ wet

How to connect a Boombar to an MP3 player?

With the BoomBar+ turned on, insert the 3.5 mm aux cable into the Aux input (3) on the BoomBar+ 2. The LED indicator (2) will turn solid green and any active wireless connection will disconnect 3. Plug the other end of the aux cable into the audio/headphone output on an MP3 player or other audio source 4.