Articles

How do you make a schematic in OrCAD Capture?

by Rhyley Bryan

How do you make a schematic in OrCAD Capture?

Chapter 1: Schematic Capture

  1. Using this tutorial. Quick video showing you how to use this OrCAD tutorial.
  2. Start a New Schematic Project.
  3. Add Libraries and Parts.
  4. Search and Place Parts.
  5. Connect Parts.
  6. Name Nets.
  7. Define Differential Pairs.
  8. Assign Part Information to the Design.

How do you draw PCB layout in OrCAD?

Chapter 2: OrCAD PCB Editor

  1. Using this Tutorial.
  2. Assigning Footprints to Your Components.
  3. Generate a PCB Editor Netlist in OrCAD Capture.
  4. Set Up PCB Design and Draw a Board Outline.
  5. Create and Place Mechanical Symbols.
  6. Place Components.
  7. Set Up Differential Pairs and Constraint Manager.
  8. Create Copper Plane and Shapes.

How do you open an OrCAD schematic?

How to integrate an OrCAD Capture schematic design to an OrCAD PCB Editor PCB design

  1. Open OrCAD Capture.
  2. Create a new schematic design by clicking File>New>Design or open your current schematic design by clicking File>Open>Design.
  3. Add symbols into your library by following our import guide here.

How do you use Allegro PCB designer?

Allegro PCB Design Tutorial

  1. Select the components (capacitors, sockets, etc.)
  2. For each component, you have to create a footprint.
  3. You have to create a schematic view of your board.
  4. Once you have the schematic, you have to generate the netlist and import it to Allegro PCB Editor to complete the board layout.

Is PSpice an OrCAD?

OrCAD is a suite of products for PCB Design and analysis that includes a schematic editor (Capture), an analog/mixed-signal circuit simulator (PSpice) and a PCB board layout solution (PCB Designer Professional).

How much does OrCAD capture cost?

Although significantly cheaper than Altium, OrCad is still really expensive with a price tag of $2,300.

Is Altium better than OrCAD?

[2] Simulation accuracy and results: OrCAD provides more efficient simulation results as compared to Altium, and performs faster simulations. Altium is a better alternative here. [4] Schematic Library Editor: Altium allows better editing and placing of electrical components such as wires and ports as compared to OrCAD.

Is OrCAD and PSpice are same?

Which tool is best for PCB design?

Top 10 Best PCB Design Software of 2021

  • PROTEL (Altium Designer)
  • PADS (PowerPCB)
  • ORCAD.
  • Allegro.
  • Eagle（Easily Applicable Graphical Layout Editor）
  • Kicad.
  • EasyEda.
  • Fritzing.

Which software is best for PCB design?

Our Top 10 printed circuit design software programmes

  1. Eagle. EAGLE is a PCB design software developed by the German CadSoft Computer GmbH created by Rudolf Hofer and Klaus-Peter Schmidiger in 1988.
  2. Altium.
  3. Proteus.
  4. KiCad.
  5. Cadence OrCAD PCB Designer.
  6. DesignSpark.
  7. Protel.
  8. Cadstar.

How to draw a PCB in OrCAD editor?

OrCAD PCB Editor Tutorial: 03. Set Up PCB Design and Draw a Board Outline Set up design parameters and grid spacing to get ready for your PCB design, draw the board outline and add layers to your design. Mechanical symbols represent physical objects that you can place in your board design and are not part of the netlist.

How to start a schematic project in OrCAD Capture?

Start a New Schematic Project Create a new schematic project in OrCAD Capture, set preferences for the schematic design canvas, add a title block and create a new library for the design. 2. Add Libraries and Parts Set up your library by adding parts from an existing Capture default library or create a new part from scratch.;

How to pre route a PCB in OrCAD?

Pre-route the board by creating fanout for all the power and ground traces, route differential pairs and the rest of the entire board, then finalize the design by running a post- routing inspection. OrCAD PCB Editor Tutorial: 09. DRC checking and Manufacturing

Can you cross probe components in OrCAD Capture?

You can place your components manually or automatically in OrCAD. Seamless integration between OrCAD Capture and OrCAD PCB Editor allow you to cross place components and cross-probe between your schematic and PCB design. 7. Set Up Differential Pairs and Constraint Manager