How do you make a 1966 Mustang handle better?

The standard shelby drop, nice new springs, shocks, 1″ performance sway bar will make your car handle very nice. Adding roller spring perches, adjustable strut rods ect also helps. Start with the basics and see how you like it. Probably the biggest performace increase will come from a set good of performance tires.

What is the best suspension for a Mustang?

Best Shocks & Struts For Mustang – Ranked & Reviewed

• Shop KYB Mustang Shocks & Struts.
• Shop Koni Mustang Shocks & Struts.
• Shop Bilstein Mustang Shocks & Struts.
• Shop Strange Mustang Shocks & Struts.
• Shop Eibach Mustang Shocks & Struts.

What is the biggest engine you can put in a 66 Mustang?

This 1966 is easily able to accommodate the 5.0L (or a 347 or larger stroker engine), even with the late-model’s serpentine-belt drive and related accessories.

Do Mustangs have good suspension?

The stock Mustang suspension setup is great for daily drivers with no modifications, but it can leave a lot to be desired for your average gearhead. The S550 Mustang made drastic improvements to the suspension setup from the factory, but still struggled in some areas.

Do Mustangs have shocks or struts?

The shocks are in the rear and the struts are in the front of your Mustang, and they are encased by your Mustang’s springs. When you lower your Mustang with a set of springs, you will want to consider upgrading the shocks and struts as well to maintain a balance throughout the vehicle.

What engine fits in a 66 Mustang?

This 1966 is easily able to accommodate the 5.0L (or a 347 or larger stroker engine), even with the late-model’s serpentine-belt drive and related accessories. This is an extremely popular swap because it’s fairly easy, not very costly, and it provides significant benefits in power and MPG.

When did Mustang switch to IRS?

8.8 IRS (Independent Rear Suspension) The Mustang first used the 8.8 IRS on 1999-2004 Cobra models. The IRS became standard across the Mustang line for the 2015 model year with the “super 8.8.”

Should I replace all 4 shocks at the same time?

Finally, replace your struts and shocks in pairs Shocks and struts should always be replaced in pairs or, better yet, all four, for even, predictable handling and control. After all, all four have been on the vehicle for the same number of miles and worked under the same conditions.

Where can I buy 1966 Mustang suspension parts?

So “suspend” your power of disbelief and believe in the great 1966 Mustang suspension parts and kits we offer at CJ Pony Parts — all at great prices. We provide free ground shipping throughout the contiguous United States on purchases above the minimum order value.

What kind of front suspension does a 64.5-70 Mustang have?

HEIDTS® now offers Mustang II Front Suspension crossmembers and components to make it easy! This is an all new design for the 64.5-70 Mustang that allows for easier installation and better fitment of the early Ford 289, 351, 390 and 4.6L motors (PM-320-E-K)!

How to upgrade suspension on a classic Mustang?

You just need to press in the new bushings and mount them up using the supplied new U-bolt hardware and mounting bolts. Once in place they deliver more spring rate and a lower ride height. For a system that works on such a wide variety of vehicles, it delivered positive results across the board on Bertha.

Can a Mustang be converted to a truck?

This commercial conversion involves replacing not only the entire original steering system, but also most of the front suspension.