How do I test my pool pH without a kit?

To those wondering how to test pool water without kit, you can make a homemade pH indicator using red cabbage. Put a few drops of red cabbage juice into the water you are testing and see if it changes color. You can also make pH test strips using red cabbage juice and some filter paper.

Is it better to have high or low pH in pool?

Proper pool pH is right in the middle — pool pros recommend that pH be between 7.3 and 7.6 for optimum performance and cleanest water. If the pH gets higher than 7.8, the water is becoming too alkaline. Water with a pH that’s too high also can cause skin rashes, cloudy water and scaling on pool equipment.

How long do pool test kits last?

Most pool test reagents will last a year at least. Some will expire after two years or longer. These timeframes are dependent on the reagent and the manufacturer. It’s also important to note that these expiration dates can change periodically depending on the company making them.

What pH is best for pools?

Pool water pH is best when kept in the range of 7.2 to 7.8. A value of 7 to 14 is considered basic with 14 being the greatest base activity. Another word for basic is alkaline; however, this is not to be confused with total alkalinity. pH and total alkalinity are not the same but can be influenced by each other.

What is the optimum pH level for pools?

The ideal swimming pool pH range is 7.4 to 7.6, with 7.5 being an ideal target pH value. Pool owners need to watch the pH level carefully, as too low or too high pH can cause significant damage to swimming pools.

What should be the pH level of a pool?

work gloves Test your water’s pH and total alkalinity using a pool water testing kit . The pH level should be between 7.2 and 7.6. The total alkalinity should be between 80 ppm and 150 ppm. If the levels are too high, you will need to lower your water’s pH.

How does the pH level affect a pool?

pH. This is the measure of acid and base in the pool water, and it’s important to maintain just the right balance: If the pH of your swimming pool water drifts too far toward the acid side of the scale, corrosion of pool surfaces and equipment can occur. If your pH is too far toward the base side, your pool can be at risk for scaling, deposits, and cloudy water.