How do I set the date and time on my Concord Express?

To set the system time:

1. Enter the programming menus by pressing 9 + System Master Code.
2. Press 00. .
3. Enter the correct time in 24-hour format (4 digits), then press # . For example, if the current time is 7:23 a.m., press 0723. + # .
4. Press * + 4 + # to exit the programming menus.

How do you program a Concord 4?

To enter program mode: Press 8, 4321, 0, 0. The display shows SYSTEM PROGRAMMING.

How do I change the installer code on my Concord 4?

How do I change the installer code on my Concord 4?

1. unplug alarm from outlet.
2. locate eprom.
3. remove eprom.
4. wait 2 minutes.
5. can verify as keypad will do nothing by trying options.
6. plug prom back in.
7. plug power back in.

How do you clear the alarm memory on a Concord 4?

To begin this process, press the “asterisk” key. While the keypad begins displaying status updates, press the “disarm” button followed by your 4-digit alarm code. This will clear the system memory and prevent the system from displaying the same message again for 4-10 hours.

How do you disarm Concord Express?

To disarm your system with a keychain touchpad, press the Unlock button. Your installer can set up your keychain touchpad to arm the system in one of two ways: Press the Lock button to arm the system directly to Level 3 with no Exit delay. Using this method, you would not be able to arm to Level 2.

How do I set the date and time on my DSC keypad?

Instructions

1. Press the * button, followed by 6.
2. Enter your system’s master code.
3. Press 1 to Select Time and Date programming.
4. If you have a Full Message LCD Keypad, use the < or > keys to scroll to the menu options and press *.
5. Using the number keys, enter the time in HH:MM format and date in MM:DD:YY format.

What is the user manual for Concord 4?

4 Concord 4 User Manual Your system may include optional components that add capability to: • Control heating/air conditioning. • Report alarms by cellular phone link in case landlines are down or inoperative. • Control/monitor the system from on- or off-site using a touchtone phone or via the Internet. System communication

How to set time and date for Interlogix Concord panel?

Press “7” and then “1” on your keypad. While the chime is enabled, the display will read “Chime Is On ” or “Chime On.” How do I set the Time and Date for my Interlogix Concord Panel? From the keypad, enter user programming by pressing 9 and the master code. Press # to get to the time set-up. Enter the correct hour (00-23) and minute (00-59).

What are the sensor characteristics of the Concord 4?

Sensor group characteristics 130 Sensor text 134 System event triggers 136 Sensor group event triggers 137 Sensor number event triggers 138 System feature event triggers 141 Response characteristics 143 Response numbers 143 Specifications 145 Concord 4 Installation Manual iii Important information Intended use

What are the numbers on the Concord 4 series security system?

Concord 4 Series Security Systems Part Numbers: 600-1021-95R 600-1022-95R 600-1040 www.gesecurity.com Notices FCC Part 15 Information to the User Changes or modifications not expressly approved by GE Security can void the user’s authority to operate the equipment.