How do I know if my neck is quarter sawn?
How do I know if my neck is quarter sawn?
If the end grain is oriented vertically (perpendicular to the fingerboard), it’s likely quartersawn, or at least is the pith cut of the flitch. Pith is the centre of the tree, and a flitch is a sawn log.
Is a quarter sawn neck better?
Quarter Sawn has a slight advantage in that it is more dimensionally stable in the width direction. However, we dry our wood very carefully so this is not an issue. With roasted maple, none of it matters. Flat Sawn will also show more figuring on the side of the neck if it is for instance flame maple.
Are Fender necks quartersawn?
There are vintage Fender necks which are quartersawn.
What is the difference between plain sawn and quarter sawn?
Plain Sawn lumber is the most common cut of lumber used in hardwood flooring. The plain sawn (tangential) grain is less dimensionally stable than other cuts and can cup more easily. Quarter Sawn. Quarter Sawn lumber is produced when the log is cut into four quarters (hence the name), then each quarter is flat-sawn.
Why is quarter sawn better?
Quarter-sawn wood is more stable than plain-sawn. Not only is it less prone to cupping, it also expands and contracts less. Quarter-sawn provides a “quieter” and straighter face grain than plain-sawn.
What is the best wood for a guitar neck?
Mahogany is the most common wood used for building necks for acoustic guitars. It is strong, dense but light and easy to carve.
What does Quarter sawn maple look like?
When maple is quarter-cut the figure appears as vertical flame lines. The same appears in Koa wood. However, the same figure appears curly when viewed on plain-sawn grain. In truth, the same vertical flame lines appear when quartersawn or plain-sawn.
How is quarter sawn oak cut?
Quarter sawing gets its name from the fact that the log is first quartered lengthwise, resulting in wedges with a right angle ending at approximately the center of the original log. Each quarter is then cut separately by tipping it up on its point and sawing boards successively along the axis.
What is flat sawn lumber?
Plain sawn lumber is also commonly referred to as “flat sawn”. This is the most common and widely used method of sawing. Plain sawn lumber is produced by making the first cut on a tangent to the circumference of the log. Each additional cut is then made parallel to one before.
Why is quarter sawn more expensive?
Quarter sawn wood is more expensive because it is more labor intensive to produce and the manufacturing process produces more waste than plain sawn lumber. At the sawmill, each log is sawed at a radial angle into four quarters, hence the name, then each quarter is plain sawn.
Is rift or quarter sawn more expensive?
Rift and/or Quarter Sawn is a premium cut and is generally more expensive than Plain Sawn. It is also considered more stable because of the vertical grain orientation.
What are the disadvantages of quarter sawn?
Quarter sawn wood is more expensive because it is more labor intensive to produce and the manufacturing process produces more waste than plain sawn lumber.
What does it mean to use a quartersawn neck?
“Quartersawn” is a woodworking term that describes a certain specific and non-standard method of milling lumber from trees. Quartersawn instrument necks are unusually strong, straight-grain necks superior to standard necks in almost every way. Quartersawn wood is more expensive than conventionally milled wood;
Can a quarter sawn neck be used for furniture?
In other words, quarter-sawn wood may have a better application in the furniture industry. Since I can’t be sure, and since I can only go by my own experience and gut, my feeling is that quarter-sawn necks are unneccessary.
Which is more expensive a quarterawn neck or milled wood?
Quartersawn wood is more expensive than conventionally milled wood; guitars and basses with quartersawn necks are accordingly more expensive.
What’s the difference between quarter sawn and flat sawn Maple?
Vertical grain pattern comes from Quarter Sawn maple and the neck on the right has a horizontal grain pattern, which is Flat Sawn. What does this mean for neck stability and where did the Quarter Sawn vs. Flat Sawn debate all start? Here’s John,