How do I factory reset my RV042?

Reset the Linksys RV042 While the Linksys RV042 router is on take a straightened paperclip and press down on the reset button for about 30 seconds. This begins the reset process. If you don’t hold the reset button down for long enough you might end up only rebooting the router instead of resetting it.

How do I reset my Linksys router to factory settings?

To perform a factory reset, please follow the steps below:

1. Ensure the router is ON.
2. Using a paper clip, push and hold the Reset button.
3. Hold the reset switch for 10-15 seconds.
4. Disconnect and reconnect the router’s power adapter.
5. Once it fully reboots, you can use the default username and password to connect the device.

What happens if I reset my router to factory defaults?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.

How do I reset my Cisco RV042 password?

Enter the password of the device in the Password field. The default password is ‘admin’. Note: If you forget the password, you can reset the router to factory defaults which returns the device to the default login. To do this, hold the reset button for 30 seconds.

How do I reset my Cisco router to factory settings?

1. Prepare the router. Make sure the Cisco router is turned off and the power cord is plugged into both the router and the power source.
2. Locate the reset button. Look for the small factory reset button on the back of the router.
3. Use the reset button.
4. Wait for the reset to complete.

How do I wipe my router clean?

How to Reset a Router

1. Keep your router plugged in.
2. Find your router’s reset button. This will be on the back or the bottom of your router.
3. Use a paperclip to hold down the reset button for 30 seconds.
4. Release the button.
5. Wait for the router to power back on.

How do I completely Reset my router?

To reset your router:

1. Locate the Reset button on the back of your router.
2. With the router powered on, use the pointed end of a paperclip or similar object to press and hold the Reset button for 15 seconds.
3. Wait for the router to fully reset and power back on.

How can I Reset my Linksys router to factory settings?

Resetting your Linksys router to factory default settings. QUICK TIP: Observe the Power light of the router while pressing the button. It should blink or flash as an indication that the router is properly resetting. Step 2: Unplug the router from the power outlet for 30 seconds. Plug it back and wait for the Power light to turn solid.

How to reset rv016 router to factory settings?

Step 1. Use a pointy object such as a paper clip to press and hold the Reset button for 30 seconds to reset the router. Note: The DIAG light on the front of the device will glow orange during this process.

What happens when I Reset my router to factory settings?

Once you reset the router, the settings will be reverted to its factory defaults. All of the customized settings of the router (Wi-Fi name (SSID), wireless security, etc.) will be erased. IMPORTANT: If you want to restore the router’s original settings without re-configuring it, you have to save a backup file.

How do I Reset my router to default settings?

Once prompted, enter your router’s administrator credentials to log in. The default password is admin and no username. If you have changed your router’s administrator password, use that instead. Click Factory Defaults. Click on the button. Once you have successfully reset your router, you will need to reconfigure its settings.