How do I expand my Synology?

Expand storage capacity with Storage Manager

1. Go to the Storage Pool tab and select the storage pool to be expanded. For DSM 7.0 and above: Click. and select Expand. For DSM 6.2 and earlier: Click the Action drop-down menu and select Expand.
2. Click Apply to confirm settings.

What is DX517?

Synology DX517 can be used as a dedicated local backup solution for the Synology DiskStation. When created as a separate volume, the DX517 provides a great backup solution to its local hard disks in case of system failure.

How do I connect my Synology DX517?

1 Log in to the DiskStation Manager (DSM) of the main DiskStation unit. 2 Go to Control Panel > External Devices > External Devices to confirm the expansion unit is successfully connected. 3 Go to Storage Manager to manage storage space creation or expansion.

Can you daisy chain Synology?

Yes you can. The additional unit is more of fallback though. If you are looking for more always available storage then get an expansion unit, this can connect 2 to it.

Can synology use SAS drives?

Today, Synology is launching their first product to target this market, the RS10613xs+. The unit has 10 bays in a 2U form factor. It can accept both SATA and SAS drives, an essential requirement in this market.

What is RAID F1?

RAID F1 is a 1-disk resiliency based on RAID 5 concepts. Writing more data to a single SSD in a group of SSDs allows for a single disk to complete its estimated life cycle before any others in the array. This provides a single, predictable failure point, which is within the fault tolerance of the array.

What is Xpenology?

Xpenology is a bootloader for Synology’s operating system DSM, running on a custom Linux version developed by Synology. Its optimized for running on a NAS server with all of the features you often need in a NAS device. They’re smart using Linux and would fix strange bugs remote over ssh.

Should I use SHR or SHR 2?

When it comes to writing speed, SHR performs slightly better than the SHR-2, as it is better optimized for a one-disk redundancy system. You can bank on it if you are trying to store and protect your data in a few Hard Disk Drives.

Can you add 5 bays to Synology DiskStation?

Easily add 5 additional drive bays to Synology DiskStation. Supporting both 2.5″ and 3.5″ SATA drives, DX517 is a flexible solution supporting on-the-fly volume expansion or serving as a local backup destination. Managed from DiskStation Manager on the host NAS, the additional bays in the DX517 are immediately ready to be used once connected.

Do you need an expansion unit for Synology?

Scale up your storage with additional expansion units. To have better performance, we recommend creating storage volumes physically located within the same Synology server or Expansion Unit, rather than creating volumes across your server and Expansion Unit.

How does the Synology 5bay dx517 volume expansion work?

Managed from DiskStation Manager on the host NAS, the additional bays in the DX517 are immediately ready to be used once connected. On-the-fly volume expansion ensures that storage and services on the host are not interrupted during volume expansion.

How big is the cable for Synology 5bay?

The cable is custom for the Synology connectors and only about 18 inches long, so you need to store them alongside or very close to each other. I have them on separate shelves on a wire rack vertically and it reaches fine (hopefully the pic is approved for your review).

https://www.youtube.com/watch?v=V9fwVfj5Owg