How do I connect my Sony Blu-Ray player to my wireless network?

Set up a wireless connection

1. Make sure your Blu-ray Disc player is connected to your TV.
2. Turn on your TV and make sure to select the input that’s connected to your Blu-ray Disc player.
3. Turn on your Blu-ray Disc player.
4. Using the supplied Blu-ray Disc player remote control, press the HOME button.
5. Select Setup.

Why won’t my Sony Blu-Ray player connect to WIFI?

Power reset your modem/router Unplug the power cable to your modem/router and wait about 60 seconds. Reconnect the power cable to your modem/router and make sure it’s turned on. Wait until the device is finished making it’s connection to the internet and your network. Check if the issue is resolved.

Why is my Sony DVD player not connecting to my TV?

Verify that the HDMI cable is securely connected to both the TV and the Blu-ray Disc player. Make sure the TV is set to the proper input. Most TV remotes have an Input button that cycles from one input to the next. Press the Input button repeatedly until the correct HDMI input is displayed on the TV.

How do I add apps to Sony Blu-Ray player?

You can add or remove these pre-installed apps from the My Apps area of the Blu-ray Disc® Player….

1. On the supplied IR remote control, press the HOME button.
2. Select the All Apps.
3. Press the ENTER button.
4. In the All Apps screen, select the app you want to add.
5. Press the OPTIONS button.
6. Select Add to My Apps.

Can I plug my phone into my Blu-Ray player?

If your charging port (which is also a data port, and therefore can connect your phone to a computer, car audio system, etc.) is is USB micro or USB-C, you need a cable that will connect USB-A (the port on your Blu-Ray player) to that type of connection.

How do I connect my Blu-ray player to my wireless network?

Connecting a Blu-Ray Player to Your WiFi Network

1. Make sure your Blu-ray player and TV are powered on and that your WiFi network is working properly.
2. Navigate to your Blu-ray player’s main menu screen.
3. Open Network Settings and then select WiFi Setup.
4. Select Wireless as your connection type.

How do I connect my Sony DVD player to the WiFi?

Follow the steps below to know how to connect your Sony Blu-ray Disc player to your Wi-Fi.

1. To set up the wireless connection, you need to start by pressing the HOME button on the remote.
2. Select the Setup option and select Network Settings.
3. Select Internet Settings, then select Wireless Setup.
4. Select Scan.

Can you connect your phone to your Blu-ray player?

Pairing the Blu-ray Disc Player for the First Time On the supplied remote control, press BLUETOOTH button. On the playback screen, select Bluetooth Device. Under the Bluetooth Settings, select Device List. To activate the pairing mode of your Bluetooth device, check its manual.

How do I connect my Sony DVD player to my Smart TV?

Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

Can you download Disney Plus on Sony Blu-ray?

No, the Disney+ app isn’t supported on Blu-ray Disc players.