How do I connect my NanoStation M5 to my router?

Using Ethernet cables, connect the following:

1. Connect the LRS gateway to the “Secondary” port on the router.
2. Connect the “Main” port on the router to the “POE” port on the power adapter.
3. Connect the “LAN” port on the power adapter to your internet source (optional)

What is the use of NanoStation M5?

The Ubiquiti NanoStation M5 provides a secondary Ethernet port with software enabled PoE output for seamless IP Video integration. Remote hardware reset circuitry of Ubiquiti NanoStation M5 allows for device to be reset remotely from power supply location.

What is the default IP address of NanoStation M5?

192.168.1.20
There should then be at least one LED lit on the back of the Nanostation. On the original Nanostation shipping box, find and write down the default IP address (we assume: 192.168. 1.20), the user name and password (should both be “ubnt”).

How to maximize the use of the nano station loco M5?

This article can serve as a guide on how to maximize the use of our Nano Station Loco M5. In this article we will be going to be utilizing an IP Megapixel system.

How to set up point to point on nano M5?

Once you are here you can log in using UBNT as Username and Password Select your Country and agree to the terms of use by ticking the radio button. Once you have gained access to the Main GUI, navigate to the Wireless Tab Match the Settings displayed. Hit Change but not apply. Match your Gateway as well as the DNS server.

What are the LEDs on my Nanostation M5?

LAN2 Secondary Ethernet (NanoStation M2/M3/M5 only) The LED will light steady green when an active Ethernet connection is made to the Secondary port and flash when there is activity. Signal In airOS®, you can modify the wireless signal strength threshold values for each LED on the Advanced tab under Signal LED Thresholds.

How do I connect my nano station to my router?

Attach an Ethernet cable from your Router LAN port to the “LAN” port located on the Nano stations PoE switch. *NVR connections are simple simply attach your NVR to the Router by attaching a cable in between the LAN port on the NVR to the LAN port of your router.